• 8. June – 14. June 2026

  • Monday, 8. June
  • Lecture hall III/3A, 07:00–11:00, Martin Česnik, Zagovori (Dynamics (DNMP))
  • Leskovarjeva conference room, 07:00–08:00, Dekanat FS, Joga
  • Lecture hall II/3B, 08:00–17:00, Darja Rupnik Poklukar , Ustni izpiti PDER
  • Lecture hall III/4, 08:00–10:00, Franc Majdič, Izpit: Hidravlične komponente in sistemi (Hydraulic components and systems (HKSM))
  • Lecture hall III/4, 08:00–10:00, Franc Majdič, Izpit: Hydraulic Components and Systems (Hydraulic Components and Systems (HCSE))
  • Lecture hall III/4, 08:00–10:00, Franc Majdič, Izpit: Hidravlične komponente in sistemi (Hydraulic components and systems (HKSM))
  • Lecture hall IV/4, 08:00–10:00, Nikola Vukašinović, Izpit: Metodika konstruiranja - RRP (Engineerig Design Methodology - RRP (MTKR))
  • Lecture hall IV/4, 08:00–10:00, Nikola Vukašinović, Izpit: Snovanje in razvoj izdelka (Product Design and Development (2046))
  • Lecture hall IV/4, 08:00–10:00, Nikola Vukašinović, Izpit: Metodika konstruiranja - RRP (Engineerig Design Methodology - RRP (MTKR))
  • Lecture hall V/2, 08:00–10:00, Nikola Vukašinović, Izpit: Metodika konstruiranja - RRP (Engineerig Design Methodology - RRP (MTKR))
  • Lecture hall V/2, 08:00–10:00, Nikola Vukašinović, Izpit: Snovanje in razvoj izdelka (Product Design and Development (2046))
  • Lecture hall V/2, 08:00–10:00, Nikola Vukašinović, Izpit: Metodika konstruiranja - RRP (Engineerig Design Methodology - RRP (MTKR))
  • Lecture hall V/8, 08:00–10:00, Nikola Vukašinović, Izpit: Metodika konstruiranja - RRP (Engineerig Design Methodology - RRP (MTKR))
  • Lecture hall V/8, 08:00–10:00, Nikola Vukašinović, Izpit: Snovanje in razvoj izdelka (Product Design and Development (2046))
  • Lecture hall V/8, 08:00–10:00, Nikola Vukašinović, Izpit: Metodika konstruiranja - RRP (Engineerig Design Methodology - RRP (MTKR))
  • Lecture hall II/2, 09:00–11:00, Andrej Grebenšek, Izpit: Letalska navigacija 2 (Air navigaton 2 (LN2P))
  • Lecture hall II/4, 10:00–12:00, Jurij Prezelj, Izpit Uvod v akustiko (Introduction to acoustics (UVAP))
  • Lecture hall II/4, 10:00–12:00, Jurij Prezelj, Izpit Inženirska akustika
  • Lecture hall III/4, 10:00–12:00, Boris Jerman, Izpit: Transportna sredstva in sistemi (Material handling equipment and systems (TSSP))
  • Lecture hall III/4, 10:00–12:00, Boris Jerman, Izpit: Transportna sredstva in sistemi (Material handling equipment and systems (TSSP))
  • Lecture hall IV/2, 10:00–12:00, Tomaž Kek, Izpit: Metode preizkušanja v proizvodnji (Testing methods in production (MPPP))
  • Lecture hall IV/2, 10:00–12:00, Tomaž Kek, Izpit: Preiskave materialov in izdelkov (Materials and Product Testing (3079))
  • Lecture hall IV/2, 10:00–12:00, Tomaž Kek, Izpit: Metode preizkušanja v proizvodnji (Testing methods in production (MPPP))
  • Lecture hall IV/4, 10:00–12:00, Primož Podržaj, Izpit: Mehatronski aktuatorji (Mechatronic actuators (MHAP))
  • Lecture hall IV/4, 10:00–12:00, Primož Podržaj, Izpit: Mehatronski aktuatorji (Mechatronic actuators (MHAP))
  • Lecture hall V/2, 10:00–13:00, Niko Herakovič, Izpit: Montažni in strežni sistemi (Assembly and handling systems (MSSM))
  • Lecture hall V/2, 10:00–13:00, Niko Herakovič, Izpit: Montažni in strežni sistemi (Assembly and handling systems (MSSM))
  • Lecture hall V/8, 10:00–12:00, Marko Nagode, Izpit: Konstruiranje na utrujanje (Fatigue design (KNUP))
  • Lecture hall III/2, 11:00–13:00, Matija Jezeršek, Izpit: Laserska tehnika (Laser technique (LSTP))
  • Lecture hall III/2, 11:00–13:00, Matija Jezeršek, Izpit: Osnove laserske tehnike (Introduction to Laser techniques (3117))
  • Lecture hall V/8, 12:00–14:00, Marko Nagode, Izpit: Strojni elementi 2 - PAP (Machine elements 2 - PAP (SE2P))
  • Lecture hall V/8, 12:00–14:00, Marko Nagode, Izpit: Strojni elementi 2 - PAP (Machine elements 2 - PAP (SE2P))
  • Lecture hall III/3B, 13:00–15:00, Niko Herakovič, Izpit: Pametne tovarne (Smart factories (PMTM))
  • Lecture hall III/3B, 13:00–15:00, Niko Herakovič, Izpit: Smart Factories (Smart Factories (SMFE))
  • Lecture hall III/3B, 13:00–15:00, Niko Herakovič, Izpit: Pametne tovarne (Smart factories (PMTM))
  • Lecture hall II/2, 14:00–20:00, Jacinta Podbršček, RealHyFC general assembly
  • Lecture hall IV/2, 14:00–16:00, Miha Brojan , Izpit: Mehanika leta letala (Mechanics of flight (MLLP))
  • Lecture hall IV/2, 14:00–16:00, Miha Brojan , Izpit: Mehanika leta letala (Mechanics of aircraft flight (3137))
  • Lecture hall IV/2, 14:00–16:00, Miha Brojan , Izpit: Trdnost (Strength of materials (TRDR))
  • Lecture hall IV/2, 14:00–16:00, Miha Brojan , Izpit: Trdnost (Strength of materials (TRDR))
  • Lecture hall IV/2, 14:00–16:00, Miha Brojan , Izpit: Mehanika leta letala (Mechanics of flight (MLLP))
  • Lecture hall IV/4, 14:00–16:00, Miha Brojan , Izpit: Mehanika leta letala (Mechanics of flight (MLLP))
  • Lecture hall IV/4, 14:00–16:00, Miha Brojan , Izpit: Mehanika leta letala (Mechanics of aircraft flight (3137))
  • Lecture hall IV/4, 14:00–16:00, Miha Brojan , Izpit: Trdnost (Strength of materials (TRDR))
  • Lecture hall IV/4, 14:00–16:00, Miha Brojan , Izpit: Trdnost (Strength of materials (TRDR))
  • Lecture hall IV/4, 14:00–16:00, Miha Brojan , Izpit: Mehanika leta letala (Mechanics of flight (MLLP))
  • Lecture hall V/2, 14:00–16:00, Miha Brojan , Izpit: Mehanika leta letala (Mechanics of flight (MLLP))
  • Lecture hall V/2, 14:00–16:00, Miha Brojan , Izpit: Mehanika leta letala (Mechanics of aircraft flight (3137))
  • Lecture hall V/2, 14:00–16:00, Miha Brojan , Izpit: Trdnost (Strength of materials (TRDR))
  • Lecture hall V/2, 14:00–16:00, Miha Brojan , Izpit: Trdnost (Strength of materials (TRDR))
  • Lecture hall V/2, 14:00–16:00, Miha Brojan , Izpit: Mehanika leta letala (Mechanics of flight (MLLP))
  • Lecture hall V/8, 14:00–16:00, Miha Brojan , Izpit: Mehanika leta letala (Mechanics of flight (MLLP))
  • Lecture hall V/8, 14:00–16:00, Miha Brojan , Izpit: Mehanika leta letala (Mechanics of aircraft flight (3137))
  • Lecture hall V/8, 14:00–16:00, Miha Brojan , Izpit: Trdnost (Strength of materials (TRDR))
  • Lecture hall V/8, 14:00–16:00, Miha Brojan , Izpit: Trdnost (Strength of materials (TRDR))
  • Lecture hall V/8, 14:00–16:00, Miha Brojan , Izpit: Mehanika leta letala (Mechanics of flight (MLLP))
  • Lecture hall III/2, 15:00–17:00, Andrej Senegačnik, Izpit: Chemical Energy Carriers (Chemical Energy Carriers (CECE))
  • Lecture hall III/2, 15:00–17:00, Andrej Senegačnik, Izpit: Kemični nosilci energije (Chemical energy carriers (KNEM))
  • Lecture hall III/2, 15:00–17:00, Andrej Senegačnik, Izpit: Kemični nosilci energije (Chemical energy carriers (KNEM))
  • Lecture hall IV/2, 16:00–18:00, Urh Štempihar Jazbec, Jan Zavodnik, Izpit TRDNOST (Strength of materials (TRDR))
  • Lecture hall IV/4, 16:00–18:00, Lidija Slemenik Perše, Izpit: Nekovinski materiali - PAP (Non-metallic materials - PAP (NKMP))
  • Lecture hall IV/4, 16:00–18:00, Lidija Slemenik Perše, Izpit: Nekovinski materiali - PAP (Non-metallic materials - PAP (NKMP))
  • Lecture hall V/2, 16:00–18:00, Lidija Slemenik Perše, Izpit: Nekovinski materiali - PAP (Non-metallic materials - PAP (NKMP))
  • Lecture hall V/2, 16:00–18:00, Lidija Slemenik Perše, Izpit: Nekovinski materiali - PAP (Non-metallic materials - PAP (NKMP))
  • Lecture hall V/8, 16:00–18:00, Lidija Slemenik Perše, Izpit: Nekovinski materiali - PAP (Non-metallic materials - PAP (NKMP))
  • Lecture hall V/8, 16:00–18:00, Lidija Slemenik Perše, Izpit: Nekovinski materiali - PAP (Non-metallic materials - PAP (NKMP))
  • Leskovarjeva conference room, 18:00–19:30, MPZ LIPA , Vaje zbora Lipa zelenela je...
  • Tuesday, 9. June
  • Lecture hall II/2, 08:00–20:00, Jacinta Podbršček, RealHyFC general assembly
  • Lecture hall II/3B, 08:00–17:00, Darja Rupnik Poklukar , Ustni izpiti PDER
  • Lecture hall III/4, 08:00–11:00, Niko Herakovič, Izpit: Hidravlični in pnevmatični sistemi (Hydraulic and Pneumatic Systems (3083))
  • Lecture hall III/4, 08:00–11:00, Niko Herakovič, Izpit: Proizvodno inženirstvo (Production engineering (PRIR))
  • Lecture hall III/4, 08:00–11:00, Niko Herakovič, Izpit: Tehnologija montaže (Assembly technology (THMP))
  • Lecture hall III/4, 08:00–11:00, Niko Herakovič, Izpit: Tehnologija montaže (Assembly technology (THMP))
  • Lecture hall IV/2, 08:00–10:00, Roman Šturm, Izpit: Heat Treatment (Heat Treatment (HTME))
  • Lecture hall IV/4, 08:00–11:00, Niko Herakovič, Izpit: Hidravlični in pnevmatični sistemi (Hydraulic and Pneumatic Systems (3083))
  • Lecture hall IV/4, 08:00–11:00, Niko Herakovič, Izpit: Proizvodno inženirstvo (Production engineering (PRIR))
  • Lecture hall IV/4, 08:00–11:00, Niko Herakovič, Izpit: Tehnologija montaže (Assembly technology (THMP))
  • Lecture hall IV/4, 08:00–11:00, Niko Herakovič, Izpit: Tehnologija montaže (Assembly technology (THMP))
  • Lecture hall V/2, 08:00–10:00, Rok Petkovšek, Izpit: Fotonika in laserski izvori (Photonics and laser sources (FLIM))
  • Lecture hall V/2, 08:00–10:00, Rok Petkovšek, Izpit: Fotonika in laserski izvori (Photonics and laser sources (FLIM))
  • Lecture hall V/2, 08:00–10:00, Rok Petkovšek, Izpit: Photonics and Laser Sources (Photonics and Laser Sources (PLSE))
  • Lecture hall III/3A, 09:00–10:30, Študentski referat ŠR , KMAG
  • Lecture hall II/5, 10:00–12:00, Miha Brojan , Izpit: Mechanics of Light-weight Structures (Mechanics of Light-weight Structures (MLSE))
  • Lecture hall III/2, 10:00–12:00, Primož Podržaj, Izpit: Krmiljeni elektromotorni pogoni (Controlled Electric Devices (3081))
  • Lecture hall IV/2, 10:00–12:00, Mihael Sekavčnik, Izpit: Napredne tehnologije v energetiki (Advanced technologies in energy supply (3058))
  • Lecture hall IV/2, 10:00–12:00, Mihael Sekavčnik, Izpit: Trajnostne tehnologije v energetiki (Sustainable energy technologies (TTEP))
  • Lecture hall V/2, 10:00–12:00, Mitjan Kalin, Izpit: Nanotechnologies (Nanotechnologies (NNTE))
  • Lecture hall V/2, 10:00–12:00, Mitjan Kalin, Izpit: Nanotehnologije (Nanotechnologies (NNTM))
  • Lecture hall V/2, 10:00–12:00, Mitjan Kalin, Izpit: Nanotehnologije (Nanotechnologies (NNTM))
  • Lecture hall V/8, 10:00–12:00, Iztok Golobič, Izpit: Procesni sistemi (Process systems (PRSP))
  • Lecture hall V/8, 10:00–12:00, Iztok Golobič, Izpit: Procesni sistemi (Process systems (PRSP))
  • UL FMF, 10:00–12:00, Gregor Skok , Izpit: Letalska meteorologija (Aeronautical meteorology (LTMP))
  • UL FMF, 10:00–12:00, Gregor Skok , Izpit: Letalska meteorologija (Aeronautical meteorology (LTMP))
  • Leskovarjeva conference room, 11:00–13:00, FS Dekanat , Zag. dr. Šmalc
  • Lecture hall III/2, 12:00–14:00, Andrej Lebar, Izpit: Proizvodna metrologija
  • Lecture hall III/4, 12:00–14:00, Miha Brojan , Izpit: Poročanje v strojništvu - PAP (Engineering reporting - PAP (PVSP))
  • Lecture hall III/4, 12:00–14:00, Miha Brojan , Izpit: Poročanje v strojništvu - PAP (Engineering reporting - PAP (PVSP))
  • Lecture hall IV/2, 12:00–14:00, Niko Herakovič, Izpit: Robotizirana proizvodnja (Robotized production (RBPP))
  • Lecture hall V/2, 12:00–14:00, Miha Brojan , Izpit: Poročanje v strojništvu - PAP (Engineering reporting - PAP (PVSP))
  • Lecture hall V/2, 12:00–14:00, Miha Brojan , Izpit: Poročanje v strojništvu - PAP (Engineering reporting - PAP (PVSP))
  • Lecture hall V/8, 12:00–14:00, Miha Brojan , Izpit: Poročanje v strojništvu - PAP (Engineering reporting - PAP (PVSP))
  • Lecture hall V/8, 12:00–14:00, Miha Brojan , Izpit: Poročanje v strojništvu - PAP (Engineering reporting - PAP (PVSP))
  • Lecture hall IV/2, 14:00–16:00, Marko Nagode, Izpit: Strojni elementi 2 - RRP (Machine elements 2 - RRP (SE2R))
  • Lecture hall IV/2, 14:00–16:00, Marko Nagode, Izpit: Strojni elementi 2 - RRP (Machine elements 2 - RRP (SE2R))
  • Lecture hall IV/4, 14:00–16:00, Marko Nagode, Izpit: Strojni elementi 2 - RRP (Machine elements 2 - RRP (SE2R))
  • Lecture hall IV/4, 14:00–16:00, Marko Nagode, Izpit: Strojni elementi 2 - RRP (Machine elements 2 - RRP (SE2R))
  • Lecture hall V/2, 14:00–16:00, Marko Nagode, Izpit: Strojni elementi 2 - RRP (Machine elements 2 - RRP (SE2R))
  • Lecture hall V/2, 14:00–16:00, Marko Nagode, Izpit: Strojni elementi 2 - RRP (Machine elements 2 - RRP (SE2R))
  • Lecture hall V/8, 14:00–16:00, Marko Nagode, Izpit: Strojni elementi 2 - RRP (Machine elements 2 - RRP (SE2R))
  • Lecture hall V/8, 14:00–16:00, Marko Nagode, Izpit: Strojni elementi 2 - RRP (Machine elements 2 - RRP (SE2R))
  • Wednesday, 10. June
  • Lecture hall II/2, 08:00–20:00, Jacinta Podbršček, RealHyFC general assembly
  • Lecture hall II/3B, 08:00–12:00, Darja Rupnik Poklukar , Ustni izpiti PDER
  • Lecture hall II/5, 08:00–10:00, Leon Kos, Izpit: Konstrukcijske tehnike
  • Lecture hall IV/2, 08:00–11:00, Niko Herakovič, Izpit: Hidravlika in pnevmatika - RRP (Hydraulics and Pneumatics - RRP (HDPR))
  • Lecture hall IV/2, 08:00–11:00, Niko Herakovič, Izpit: Hidravlika in pnevmatika (Hydraulics and Pneumatics (2053))
  • Lecture hall III/3A, 09:00–11:00, Tomaž Katrašnik , Izpit: Letalski motorji 2 (Aircraft engines 2 (LM2P))
  • Lecture hall III/3A, 09:00–11:00, Tomaž Katrašnik , Izpit: Letalski motorji 2 (Aircraft Engines 2 (3127))
  • Lecture hall III/4, 09:00–12:00, Niko Herakovič, Izpit: Montaža (Assembling (3071))
  • Lecture hall IV/4, 09:00–12:00, Niko Herakovič, Izpit: Montaža (Assembling (3071))
  • Lecture hall III/2, 10:00–12:00, Jernej Klemenc, Izpit: Transmisije in pogoni v industriji (Industrial power-trains (TPIP))
  • Lecture hall III/2, 10:00–12:00, Jernej Klemenc, Izpit: Transmisije vozil (Vehicle Transmissions (3118))
  • Lecture hall IV/2, 10:00–12:00, Roman Šturm, Izpit: Kovinski materiali - RRP (Metals - RRP (KVMR))
  • Lecture hall IV/2, 10:00–12:00, Roman Šturm, Izpit: Kovinski materiali - RRP (Metals - RRP (KVMR))
  • Lecture hall V/2, 10:00–12:00, Roman Šturm, Izpit: Kovinski materiali - RRP (Metals - RRP (KVMR))
  • Lecture hall V/2, 10:00–12:00, Roman Šturm, Izpit: Kovinski materiali - RRP (Metals - RRP (KVMR))
  • Lecture hall V/8, 10:00–12:00, Roman Šturm, Izpit: Kovinski materiali - RRP (Metals - RRP (KVMR))
  • Lecture hall V/8, 10:00–12:00, Roman Šturm, Izpit: Kovinski materiali - RRP (Metals - RRP (KVMR))
  • Lecture hall III/4, 12:00–14:00, Gregor Čepon, Izpit: Eksperimentalna modalna analiza (Experimental modal analysis (EMAM))
  • Lecture hall III/4, 12:00–14:00, Gregor Čepon, Izpit: Eksperimentalna modalna analiza (Experimental modal analysis (EMAM))
  • Lecture hall IV/3A, 12:00–14:00, Matic Cotič, Izpit: Mehanska procesna tehnika (Mechanical Process Engineering (3122))
  • Lecture hall V/8, 12:00–14:00, Tomaž Pepelnjak, Izpit: Napredni preoblikovalni procesi (Advanced forming processes (NPPM))
  • Lecture hall V/8, 12:00–14:00, Tomaž Pepelnjak, Izpit: Napredni preoblikovalni procesi (Advanced forming processes (NPPM))
  • Thursday, 11. June
  • Lecture hall II/3A, 08:00–10:00, Božidar Šarler, Izpit: Dinamika fluidov (Fluid Dynamics (2045))
  • Lecture hall II/5, 08:00–10:00, Darja Rupnik Poklukar , Izpit: Parcialne diferencialne enačbe, kompleksna analiza in optimizacija (Partial differential equations, complex analysis and optimization (PDER))
  • Lecture hall II/5, 08:00–10:00, Darja Rupnik Poklukar , Izpit: Parcialne diferencialne enačbe, kompleksna analiza in optimizacija (Partial differential equations, complex analysis and optimization (PDER))
  • Lecture hall III/2, 08:00–10:00, Matija Jezeršek, Izpit: Laserski merilni sistemi (Laser measurement systems (LMSM))
  • Lecture hall III/2, 08:00–10:00, Matija Jezeršek, Izpit: Laserski merilni sistemi (Laser measurement systems (LMSM))
  • Lecture hall III/3B, 08:00–10:00, Damjan Klobčar, Izpit: Varivost materialov
  • Lecture hall IV/2, 08:00–10:00, Darja Rupnik Poklukar , Izpit: Parcialne diferencialne enačbe, kompleksna analiza in optimizacija (Partial differential equations, complex analysis and optimization (PDER))
  • Lecture hall IV/2, 08:00–10:00, Darja Rupnik Poklukar , Izpit: Parcialne diferencialne enačbe, kompleksna analiza in optimizacija (Partial differential equations, complex analysis and optimization (PDER))
  • Lecture hall IV/4, 08:00–10:00, Darja Rupnik Poklukar , Izpit: Parcialne diferencialne enačbe, kompleksna analiza in optimizacija (Partial differential equations, complex analysis and optimization (PDER))
  • Lecture hall IV/4, 08:00–10:00, Darja Rupnik Poklukar , Izpit: Parcialne diferencialne enačbe, kompleksna analiza in optimizacija (Partial differential equations, complex analysis and optimization (PDER))
  • Lecture hall V/2, 08:00–10:00, Darja Rupnik Poklukar , Izpit: Parcialne diferencialne enačbe, kompleksna analiza in optimizacija (Partial differential equations, complex analysis and optimization (PDER))
  • Lecture hall V/2, 08:00–10:00, Darja Rupnik Poklukar , Izpit: Parcialne diferencialne enačbe, kompleksna analiza in optimizacija (Partial differential equations, complex analysis and optimization (PDER))
  • Lecture hall V/8, 08:00–10:00, Darja Rupnik Poklukar , Izpit: Parcialne diferencialne enačbe, kompleksna analiza in optimizacija (Partial differential equations, complex analysis and optimization (PDER))
  • Lecture hall V/8, 08:00–10:00, Darja Rupnik Poklukar , Izpit: Parcialne diferencialne enačbe, kompleksna analiza in optimizacija (Partial differential equations, complex analysis and optimization (PDER))
  • Leskovarjeva conference room, 08:00–18:00, FS Dekanat , rezervirano J. Tušek
  • Lecture hall IV/3B, 08:30–10:30, Študentski referat ŠR , zagovori RRP
  • Lecture hall I/4A, 09:00–11:00, Študentski referat ŠR , Komisija za dodiplomski študij
  • Lecture hall II/2, 09:00–11:00, Radivoj Kikelj , Izpit: Konstruiranje letal 2 (Aircraft design 2 (KL2P))
  • Lecture hall II/2, 09:00–11:00, Radivoj Kikelj , Izpit: Snovanje letal (Aircraft Design (3093))
  • Lecture hall V/8, 10:00–12:00, Iztok Golobič, Izpit: Procesna tehnika (Process Engineering (3054))
  • Lecture hall V/8, 10:00–12:00, Iztok Golobič, Izpit: Vodno okoljsko procesno inženirstvo (Water environmental process engineering (VOPP))
  • Lecture hall III/2, 11:00–14:00, Janko Slavič, Izpit: Procesiranje signalov (Signal processing (PRSM))
  • Lecture hall III/2, 11:00–14:00, Janko Slavič, Izpit: Procesiranje signalov (Signal processing (PRSM))
  • Lecture hall III/3A, 11:00–13:00, FS Dekanat , Zag. dr. Klanjšek
  • Lecture hall III/4, 11:00–13:00, Drago Bračun, Izpit: Krmiljenje in statistični nadzor proizvodnje (Control and statistical supervision in manufacturing (KSNP))
  • Lecture hall III/4, 11:00–13:00, Drago Bračun, Izpit: Krmiljenje in statistični nadzor proizvodnje (Control and statistical supervision in manufacturing (KSNP))
  • Lecture hall IV/2, 12:00–14:00, Nikola Vukašinović, Izpit: Računalniško modeliranje geometrije (Computer aided modelling of geometry (RMGP))
  • Lecture hall IV/2, 12:00–14:00, Nikola Vukašinović, Izpit: Računalniško modeliranje geometrije (Computer aided modelling of geometry (RMGP))
  • Lecture hall IV/4, 12:00–14:00, Nikola Vukašinović, Izpit: Računalniško modeliranje geometrije (Computer aided modelling of geometry (RMGP))
  • Lecture hall IV/4, 12:00–14:00, Nikola Vukašinović, Izpit: Računalniško modeliranje geometrije (Computer aided modelling of geometry (RMGP))
  • Lecture hall V/2, 12:00–14:00, Nikola Vukašinović, Izpit: Računalniško modeliranje geometrije (Computer aided modelling of geometry (RMGP))
  • Lecture hall V/2, 12:00–14:00, Nikola Vukašinović, Izpit: Računalniško modeliranje geometrije (Computer aided modelling of geometry (RMGP))
  • Lecture hall V/8, 12:00–14:00, Nikola Vukašinović, Izpit: Računalniško modeliranje geometrije (Computer aided modelling of geometry (RMGP))
  • Lecture hall V/8, 12:00–14:00, Nikola Vukašinović, Izpit: Računalniško modeliranje geometrije (Computer aided modelling of geometry (RMGP))
  • Lecture hall II/2, 13:00–19:00, Katja Klinar, Project meeting Heat4energy
  • Lecture hall II/3A, 13:00–18:00, Katja Klinar, Project meeting Heat4energy
  • Lecture hall II/5, 13:00–15:00, Igor Petrović, Izpit: Aeromehanika in letalske konstrukcije (Aeromechanics and airframes (ALKP))
  • Lecture hall II/5, 13:00–15:00, Igor Petrović, Izpit: Aeromehanika in letalske konstrukcije (Aeromechanics and airframes (ALKP))
  • Lecture hall III/4, 13:00–15:00, Drago Bračun, Izpit: Programirljivi logični krmilniki (Programmable logic controllers (PLKP))
  • Lecture hall III/4, 13:00–15:00, Drago Bračun, Izpit: Programirljivi logični krmilniki (Programmable logic controllers (PLKP))
  • Lecture hall III/2, 14:00–16:00, Andrej Senegačnik, Izpit: Termo in jedrski energetski sistemi (Thermal and nuclear power systems (TJEP))
  • Lecture hall III/2, 14:00–16:00, Andrej Senegačnik, Izpit: Termo in jedrski energetski sistemi (Thermal and nuclear power systems (TJEP))
  • Lecture hall IV/2, 14:00–16:00, Iztok Golobič, Izpit: Heat Exchangers (Heat Exchangers (HTEE))
  • Lecture hall IV/2, 14:00–16:00, Iztok Golobič, Izpit: Prenosniki toplote (Heat exchangers (PRTM))
  • Lecture hall IV/2, 14:00–16:00, Iztok Golobič, Izpit: Prenosniki toplote (Heat exchangers (PRTM))
  • Lecture hall IV/4, 14:00–16:00, Jernej Klemenc, Izpit: Konstruiranje v industriji (System design in the industry (KVIP))
  • Lecture hall IV/4, 14:00–16:00, Jernej Klemenc, Izpit: Konstruiranje v industriji (System design in the industry (KVIP))
  • Lecture hall V/2, 14:00–16:00, Iztok Golobič, Izpit: Okoljsko inženirstvo (Environmental engineering (OKIR))
  • Lecture hall V/8, 14:00–16:00, Jernej Klemenc, Izpit: Konstruiranje v industriji (System design in the industry (KVIP))
  • Lecture hall V/8, 14:00–16:00, Jernej Klemenc, Izpit: Konstruiranje v industriji (System design in the industry (KVIP))
  • Friday, 12. June
  • Lecture hall II/3B, 07:00–20:00, Aleš Hočevar, Vzdrževanje
  • Lecture hall II/2, 08:00–10:00, Tomaž Mrlak, Izpit: Operativni postopki letal (Operational procedures of aircraft (OPLP))
  • Lecture hall II/5, 08:00–10:00, Radivoj Kikelj , Izpit: Lahka gradnja v letalstvu (Light Aircraft Structures (3088))
  • Lecture hall III/2, 08:00–10:00, Davorin Kramar, Izpit: Zagotavljanje kakovosti (Quality assurance (ZGKP))
  • Lecture hall III/2, 08:00–10:00, Davorin Kramar, Izpit: Zagotavljanje kakovosti (Quality assurance (3077))
  • Lecture hall III/3B, 08:00–18:30, Katja Klinar, Projektni sestanek Magccine
  • Lecture hall IV/4, 08:00–10:00, Uroš Stritih, Izpit: Air-conditioning, Heating, Refrigeration, Ventilation (Air-conditioning, Heating, Refrigeration, Ventilation (AHRE))
  • Lecture hall IV/4, 08:00–10:00, Uroš Stritih, Izpit: Klimatizacija, ogrevanje, ohlajevanje, prezračevanje (Air-conditioning, heating, refrigeration, ventilation (KOOM))
  • Lecture hall IV/4, 08:00–10:00, Uroš Stritih, Izpit: Klimatizacija, ogrevanje, ohlajevanje, prezračevanje (Air-conditioning, heating, refrigeration, ventilation (KOOM))
  • Lecture hall V/8, 08:00–10:00, Robert Kunc, Izpit: Dokumentacija in dokumentarni sistemi (Documentation and document management system (DDSP))
  • Lecture hall V/8, 08:00–10:00, Robert Kunc, Izpit: Dokumentacija in dokumentarni sistemi (Documentation and document management system (DDSP))
  • Leskovarjeva conference room, 08:00–17:00, FS Dekanat , Rezervirano J. Tušek
  • Lecture hall II/5, 09:00–11:00, Radivoj Kikelj , Izpit: Konstruiranje letal 1 (Aircraft design 1 (KL1P))
  • Lecture hall II/5, 09:00–11:00, Radivoj Kikelj , Izpit: Konstruiranje letal 1 (Aircraft design 1 (KL1P))
  • Lecture hall III/2, 10:00–12:00, Iztok Golobič, Izpit: Energijski in snovni tokovi v industriji (Energy and material flows in industry (ESTP))
  • Lecture hall III/2, 10:00–12:00, Iztok Golobič, Izpit: Okoljsko procesne tehnologije (Environmental Process Technology (3060))
  • Lecture hall III/2, 10:00–12:00, Iztok Golobič, Izpit: Energijski in snovni tokovi v industriji (Energy and material flows in industry (ESTP))
  • Lecture hall III/3A, 10:00–12:00, Drago Bračun, Izpit: Načrtovanje in obvladovanje kakovosti
  • Lecture hall IV/3A, 10:00–13:00, Gregor Čepon, Izpit: Advanced Dynamics (Advanced Dynamics (ADDE))
  • Lecture hall IV/4, 10:00–12:00, Mitja Mori, Izpit: Energetika v krožnem gospodarstvu (Energy supply in circular economy (EKGM))
  • Lecture hall IV/4, 10:00–12:00, Mitja Mori, Izpit: Energetika v krožnem gospodarstvu (Energy supply in circular economy (EKGM))
  • Lecture hall I/4A, 12:00–13:00, FS Dekanat , Tušek (EU Projekt)
  • Lecture hall II/2, 12:00–14:00, Damjan Klobčar, Izpit: Izdelovalne tehnologije 2 (Manufacturing technologies 2 (IT2R))
  • Lecture hall II/2, 12:00–14:00, Joško Valentinčič, Izpit: Izdelovalne tehnologije 2 (Manufacturing Technologies 2 (2048))
  • Lecture hall II/3A, 12:00–14:00, Janez Benedičič, Delovni stroji (3066) izpit (Machine design (3066))
  • Lecture hall III/2, 12:00–14:00, Primož Podržaj, Izpit: Diskretni krmilni sistemi (Discrete control systems (DKSM))
  • Lecture hall III/2, 12:00–14:00, Primož Podržaj, Izpit: Diskretni krmilni sistemi (Discrete control systems (DKSM))
  • Lecture hall III/4, 12:00–14:00, Primož Podržaj, Izpit: Diskretni krmilni sistemi (Discrete control systems (DKSM))
  • Lecture hall III/4, 12:00–14:00, Primož Podržaj, Izpit: Diskretni krmilni sistemi (Discrete control systems (DKSM))
  • Lecture hall IV/2, 12:00–14:00, Ciril Arkar, Izpit: Stavbna fizika in notranje okolje (Building physics and indoor environment quality (SFNP))
  • Lecture hall IV/2, 12:00–14:00, Ciril Arkar, Izpit: Stavbna fizika in notranje okolje (Building physics and indoor environment quality (SFNP))
  • Lecture hall IV/4, 12:00–14:00, Primož Podržaj, Izpit: Diskretni krmilni sistemi (Discrete control systems (DKSM))
  • Lecture hall IV/4, 12:00–14:00, Primož Podržaj, Izpit: Diskretni krmilni sistemi (Discrete control systems (DKSM))
  • Lecture hall V/2, 12:00–14:00, Dominik Kozjek, Izpit: Krmilna tehnika (Control technology (KRTR))
  • Lecture hall V/2, 12:00–14:00, Dominik Kozjek, Izpit: Krmilna tehnika (Control technology (KRTR))
  • Lecture hall V/8, 12:00–14:00, Dominik Kozjek, Izpit: Krmilna tehnika (Control technology (KRTR))
  • Lecture hall V/8, 12:00–14:00, Dominik Kozjek, Izpit: Krmilna tehnika (Control technology (KRTR))
  • Lecture hall III/4, 14:00–17:00, Aljoša Peperko, Izpit: Linearna algebra in vektorska analiza (Linear algebra and vector analysis (LAVR))
  • Lecture hall III/4, 14:00–17:00, Aljoša Peperko, Izpit: Linearna algebra in vektorska analiza (Linear algebra and vector analysis (LAVR))
  • Lecture hall III/4, 14:00–17:00, Aljoša Peperko, Izpit: Navadne diferencialne enačbe in linearna algebra - PAP (Ordinary differential equations and linear algebra - PAP (NDEP))
  • Lecture hall III/4, 14:00–17:00, Aljoša Peperko, Izpit: Navadne diferencialne enačbe in linearna algebra - PAP (Ordinary differential equations and linear algebra - PAP (NDEP))
  • Lecture hall III/4, 14:00–17:00, Aljoša Peperko, Izpit: Navadne diferencialne enačbe - PAP (Ordinary Differential Equations - PAP (NDEP))
  • Lecture hall IV/2, 14:00–17:00, Aljoša Peperko, Izpit: Linearna algebra in vektorska analiza (Linear algebra and vector analysis (LAVR))
  • Lecture hall IV/2, 14:00–17:00, Aljoša Peperko, Izpit: Linearna algebra in vektorska analiza (Linear algebra and vector analysis (LAVR))
  • Lecture hall IV/2, 14:00–17:00, Aljoša Peperko, Izpit: Navadne diferencialne enačbe in linearna algebra - PAP (Ordinary differential equations and linear algebra - PAP (NDEP))
  • Lecture hall IV/2, 14:00–17:00, Aljoša Peperko, Izpit: Navadne diferencialne enačbe in linearna algebra - PAP (Ordinary differential equations and linear algebra - PAP (NDEP))
  • Lecture hall IV/2, 14:00–17:00, Aljoša Peperko, Izpit: Navadne diferencialne enačbe - PAP (Ordinary Differential Equations - PAP (NDEP))
  • Lecture hall IV/4, 14:00–17:00, Aljoša Peperko, Izpit: Linearna algebra in vektorska analiza (Linear algebra and vector analysis (LAVR))
  • Lecture hall IV/4, 14:00–17:00, Aljoša Peperko, Izpit: Linearna algebra in vektorska analiza (Linear algebra and vector analysis (LAVR))
  • Lecture hall IV/4, 14:00–17:00, Aljoša Peperko, Izpit: Navadne diferencialne enačbe in linearna algebra - PAP (Ordinary differential equations and linear algebra - PAP (NDEP))
  • Lecture hall IV/4, 14:00–17:00, Aljoša Peperko, Izpit: Navadne diferencialne enačbe in linearna algebra - PAP (Ordinary differential equations and linear algebra - PAP (NDEP))
  • Lecture hall IV/4, 14:00–17:00, Aljoša Peperko, Izpit: Navadne diferencialne enačbe - PAP (Ordinary Differential Equations - PAP (NDEP))
  • Lecture hall V/2, 14:00–17:00, Aljoša Peperko, Izpit: Linearna algebra in vektorska analiza (Linear algebra and vector analysis (LAVR))
  • Lecture hall V/2, 14:00–17:00, Aljoša Peperko, Izpit: Linearna algebra in vektorska analiza (Linear algebra and vector analysis (LAVR))
  • Lecture hall V/2, 14:00–17:00, Aljoša Peperko, Izpit: Navadne diferencialne enačbe in linearna algebra - PAP (Ordinary differential equations and linear algebra - PAP (NDEP))
  • Lecture hall V/2, 14:00–17:00, Aljoša Peperko, Izpit: Navadne diferencialne enačbe in linearna algebra - PAP (Ordinary differential equations and linear algebra - PAP (NDEP))
  • Lecture hall V/2, 14:00–17:00, Aljoša Peperko, Izpit: Navadne diferencialne enačbe - PAP (Ordinary Differential Equations - PAP (NDEP))
  • Lecture hall V/8, 14:00–17:00, Aljoša Peperko, Izpit: Linearna algebra in vektorska analiza (Linear algebra and vector analysis (LAVR))
  • Lecture hall V/8, 14:00–17:00, Aljoša Peperko, Izpit: Linearna algebra in vektorska analiza (Linear algebra and vector analysis (LAVR))
  • Lecture hall V/8, 14:00–17:00, Aljoša Peperko, Izpit: Navadne diferencialne enačbe in linearna algebra - PAP (Ordinary differential equations and linear algebra - PAP (NDEP))
  • Lecture hall V/8, 14:00–17:00, Aljoša Peperko, Izpit: Navadne diferencialne enačbe in linearna algebra - PAP (Ordinary differential equations and linear algebra - PAP (NDEP))
  • Lecture hall V/8, 14:00–17:00, Aljoša Peperko, Izpit: Navadne diferencialne enačbe - PAP (Ordinary Differential Equations - PAP (NDEP))

• 15. June – 21. June 2026

  • Monday, 15. June
  • Lecture hall II/3A, 07:00–20:00, Aleš Hočevar, Vzdrževanje
  • Lecture hall II/3B, 07:00–20:00, Aleš Hočevar, Vzdrževanje
  • Leskovarjeva conference room, 07:00–08:00, Dekanat FS, Joga
  • Lecture hall III/2, 08:00–10:00, Mitjan Kalin, Izpit: Pogoni (Drives (PGNR))
  • Lecture hall IV/2, 08:00–11:00, Gregor Čepon, Izpit: Dinamika strojev in konstrukcij (Dynamics of machines and structures (DSKM))
  • Lecture hall IV/2, 08:00–11:00, Gregor Čepon, Izpit: Dinamika strojev in konstrukcij (Dynamics of machines and structures (DSKM))
  • Lecture hall III/2, 10:00–12:00, Patrick Vlačič , Izpit: Letalsko pravo (Air law (LTPP))
  • Lecture hall III/2, 10:00–12:00, Patrick Vlačič , Izpit: Letalsko pravo in predpisi (Air Law and Regulations (3091))
  • Lecture hall III/2, 10:00–12:00, Patrick Vlačič , Izpit: Letalsko pravo (Air law (LTPP))
  • Lecture hall III/4, 10:00–12:00, Franc Majdič, Izpit: Hidravlika in pnevmatika - PAP (Hydraulics and pneumatics - PAP (HIPP))
  • Lecture hall III/4, 10:00–12:00, Franc Majdič, Izpit: Hidravlika in pnevmatika (Hydraulics and Pneumatics (3061))
  • Lecture hall IV/4, 10:00–12:00, Lidija Slemenik Perše, Izpit: Nekovinski materiali - RRP (Non-metallic materials - RRP (NKMR))
  • Lecture hall IV/4, 10:00–12:00, Lidija Slemenik Perše, Izpit: Nekovinski materiali - RRP (Non-metallic materials - RRP (NKMR))
  • Lecture hall V/2, 10:00–12:00, Lidija Slemenik Perše, Izpit: Nekovinski materiali - RRP (Non-metallic materials - RRP (NKMR))
  • Lecture hall V/2, 10:00–12:00, Lidija Slemenik Perše, Izpit: Nekovinski materiali - RRP (Non-metallic materials - RRP (NKMR))
  • Lecture hall V/8, 10:00–12:00, Lidija Slemenik Perše, Izpit: Nekovinski materiali - RRP (Non-metallic materials - RRP (NKMR))
  • Lecture hall V/8, 10:00–12:00, Lidija Slemenik Perše, Izpit: Nekovinski materiali - RRP (Non-metallic materials - RRP (NKMR))
  • Lecture hall II/5, 11:00–13:00, Mihael Sekavčnik, Energetski stroji in naprave (2047) izpit (Power Engineering (2047))
  • Leskovarjeva conference room, 11:00–12:30, FS Dekanat , KNNN
  • Lecture hall III/3A, 12:00–14:00, Andrej Senegačnik, Izpit: Učinkovitost in zanesljivost energetskih sistemov (Effectiveness and Reliability of Energy Systems (3055))
  • Lecture hall III/4, 12:00–14:00, Lidija Slemenik Perše, Izpit: Reologija polimerov (Rheology of polymers (RLPM))
  • Lecture hall III/4, 12:00–14:00, Lidija Slemenik Perše, Izpit: Rheology of Polymers (Rheology of Polymers (REOE))
  • Lecture hall III/4, 12:00–14:00, Lidija Slemenik Perše, Izpit: Reologija polimerov (Rheology of polymers (RLPM))
  • Lecture hall IV/4, 12:00–14:00, Jože Kutin, Izpit: Merilni praktikum (Measurement practicum (MRPP))
  • Lecture hall IV/4, 12:00–14:00, Jože Kutin, Izpit: Merilni praktikum (Measurement practicum (MRPP))
  • Lecture hall V/2, 12:00–14:00, Mojca Volk , Izpit: Inoviranje v strojništvu - RRP (Innovation in Mechanical Engineering - RRP (IVSR))
  • Lecture hall V/2, 12:00–14:00, Mojca Volk , Izpit: Inoviranje v strojništvu - PAP (Innovation in Mechanical Engineering - PAP (IVSP))
  • Lecture hall V/2, 12:00–14:00, Mojca Volk , Izpit: Inoviranje v strojništvu - RRP (Innovation in Mechanical Engineering - RRP (IVSR))
  • Lecture hall IV/2, 14:00–16:00, Božidar Šarler, Izpit: Computational Fluid Dynamics (Computational Fluid Dynamics (CFDE))
  • Lecture hall IV/2, 14:00–16:00, Božidar Šarler, Izpit: Računalniška dinamika tekočin (Computational fluid dynamics (RDTM))
  • Lecture hall IV/2, 14:00–16:00, Božidar Šarler, Izpit: Računalniška dinamika tekočin (Computational fluid dynamics (RDTM))
  • Lecture hall IV/2, 14:00–16:00, Božidar Šarler, Izpit: Termofluidika (Thermofluidics (TMFP))
  • Lecture hall IV/2, 14:00–16:00, Božidar Šarler, Izpit: Termofluidika (Thermofluidics (TMFP))
  • Lecture hall V/2, 14:00–16:00, Božidar Šarler, Izpit: Computational Fluid Dynamics (Computational Fluid Dynamics (CFDE))
  • Lecture hall V/2, 14:00–16:00, Božidar Šarler, Izpit: Računalniška dinamika tekočin (Computational fluid dynamics (RDTM))
  • Lecture hall V/2, 14:00–16:00, Božidar Šarler, Izpit: Računalniška dinamika tekočin (Computational fluid dynamics (RDTM))
  • Lecture hall V/2, 14:00–16:00, Božidar Šarler, Izpit: Termofluidika (Thermofluidics (TMFP))
  • Lecture hall V/2, 14:00–16:00, Božidar Šarler, Izpit: Termofluidika (Thermofluidics (TMFP))
  • Lecture hall V/8, 14:00–16:00, Božidar Šarler, Izpit: Computational Fluid Dynamics (Computational Fluid Dynamics (CFDE))
  • Lecture hall V/8, 14:00–16:00, Božidar Šarler, Izpit: Računalniška dinamika tekočin (Computational fluid dynamics (RDTM))
  • Lecture hall V/8, 14:00–16:00, Božidar Šarler, Izpit: Računalniška dinamika tekočin (Computational fluid dynamics (RDTM))
  • Lecture hall V/8, 14:00–16:00, Božidar Šarler, Izpit: Termofluidika (Thermofluidics (TMFP))
  • Lecture hall V/8, 14:00–16:00, Božidar Šarler, Izpit: Termofluidika (Thermofluidics (TMFP))
  • Leskovarjeva conference room, 18:00–19:30, MPZ LIPA , Vaje zbora Lipa zelenela je...
  • Tuesday, 16. June
  • Lecture hall II/3A, 07:00–20:00, Aleš Hočevar, Vzdrževanje
  • Lecture hall II/3B, 07:00–20:00, Aleš Hočevar, Vzdrževanje
  • Computer lecture room LNMS II/1, 08:00–10:00, Nikolaj Mole, Izpit: Osnove MKE analiz (Fundamentals of FEM analysis (OMAP))
  • Computer lecture room LNMS II/1, 08:00–10:00, Nikolaj Mole, Izpit: Osnove MKE analiz (Fundamentals of FEM analysis (OMAP))
  • Lecture hall III/4, 08:00–10:00, Jože Kutin, Izpit: Eksperimentalne metode v energetskem strojništvu (Experimental methods in energy engineering (EMEP))
  • Lecture hall III/4, 08:00–10:00, Jože Kutin, Izpit: Eksperimentalne metode v energetskem strojništvu (Experimental methods in energy engineering (EMEP))
  • Lecture hall IV/2, 08:00–10:00, Tomaž Kek, Izpit: Nedestruktivne preiskave v letalstvu (Non-destructive testing in aviation (NPLP))
  • Lecture hall IV/2, 08:00–10:00, Tomaž Kek, Izpit: Nedestruktivne preiskave v letalstvu (Non-destructive testing in aviation (NPLP))
  • Lecture hall IV/4, 08:00–10:00, Joško Valentinčič, Izpit: Nekonvencionalni izdelovalni procesi (Non-traditional manufacturing processes (NIPP))
  • Lecture hall IV/4, 08:00–10:00, Joško Valentinčič, Izpit: Nekonvencionalni izdelovalni procesi (Non-traditional manufacturing processes (NIPP))
  • Lecture hall V/2, 08:00–10:00, Tomaž Pepelnjak, Izpit: Advanced Forming Processes (Advanced Forming Processes (AFPE))
  • Lecture hall V/8, 08:00–11:00, Edvard Govekar, Izpit: Obdelava in vrednotenje podatkov (Data processing and validation (OVPR))
  • Lecture hall II/5, 09:00–11:00, Igor Petrović, Letalska navigacija 1 (3086-V) izpit (Air navigaton 1 (LN1P))
  • Lecture hall II/5, 09:00–11:00, Andrej Grebenšek, Letalska navigacija 1 (3087) izpit (Aircraft Navigation 1 (3087))
  • Lecture hall III/3A, 10:00–12:00, Davorin Kramar, Izpit: Načrtovanje tehnologij in izdelkov (Technology and product planning (3075))
  • Lecture hall IV/2, 10:00–12:00, Franci Pušavec, Izpit: Načrtovanje odrezavanja in CAM (Planning of machining and CAM (NOCP))
  • Lecture hall V/2, 10:00–12:00, Valentina Šimić Škraba, Predstavitev FS
  • Lecture hall II/5, 11:00–13:00, Drago Bračun, Izpit: Avtomatizacija proizvodnje (Manufacturing automation (AMPM))
  • Lecture hall II/5, 11:00–13:00, Drago Bračun, Izpit: Manufacturing Automation (Manufacturing Automation (MNAE))
  • Lecture hall II/5, 11:00–13:00, Drago Bračun, Izpit: Avtomatizacija proizvodnje (Manufacturing automation (AMPM))
  • Lecture hall V/8, 13:00–15:00, Jernej Klemenc, Izpit: Sestavljena gonila v mobilni tehniki (Complex powertrains in mobile machinery (SGMM))
  • Lecture hall V/8, 13:00–15:00, Jernej Klemenc, Izpit: Sestavljena gonila v mobilni tehniki (Complex powertrains in mobile machinery (SGMM))
  • Lecture hall IV/4, 15:00–17:00, Marko Hočevar, Izpit: Turbinski stroji (Turbomachinery (TRSM))
  • Lecture hall IV/4, 15:00–17:00, Marko Hočevar, Izpit: Turbinski stroji (Turbomachinery (TRSM))
  • Lecture hall IV/4, 15:00–17:00, Marko Hočevar, Izpit: Turbomachinery (Turbomachinery (TRME))
  • Wednesday, 17. June
  • Lecture hall II/3A, 07:00–20:00, Aleš Hočevar, Vzdrževanje
  • Lecture hall II/3B, 07:00–20:00, Aleš Hočevar, Vzdrževanje
  • Lecture hall II/5, 08:00–10:00, Marjan Jenko, Izpit: Programiranje v mehatroniki (Programming for mechatronics (PVMP))
  • Lecture hall II/5, 08:00–10:00, Marjan Jenko, Izpit: Programiranje v mehatroniki (Programming for mechatronics (PVMP))
  • Lecture hall III/2, 08:00–11:00, Niko Herakovič, Izpit: Logistika materiala in sredstev (Logistics of material and resources (LMSP))
  • Lecture hall III/2, 08:00–11:00, Niko Herakovič, Izpit: Strega materialov in sredstev (Materials and equipment handling (3072))
  • Lecture hall III/4, 08:00–10:00, Matija Jezeršek, Izpit: Laserski sistemi (Laser systems (LSSM))
  • Lecture hall III/4, 08:00–10:00, Matija Jezeršek, Izpit: Laserski sistemi (Laser systems (LSSM))
  • Lecture hall IV/3B, 08:00–10:00, Tomaž Katrašnik , Izpit: Electromobility (Electromobility (ELME))
  • Lecture hall IV/2, 09:00–11:00, Božidar Šarler, Izpit: Termodinamika (Thermodynamics (TMDR))
  • Lecture hall IV/2, 09:00–11:00, Božidar Šarler, Izpit: Termodinamika (Thermodynamics (TMDR))
  • Lecture hall IV/3A, 09:00–11:00, Tomaž Katrašnik , Izpit: Letalski motorji 1 (Aircraft engines 1 (LM1P))
  • Lecture hall IV/3A, 09:00–11:00, Tomaž Katrašnik , Izpit: Letalski motorji 1 (Aircraft Engines 1 (3135))
  • Lecture hall IV/3A, 09:00–11:00, Tomaž Katrašnik , Izpit: Letalski motorji 1 (Aircraft engines 1 (LM1P))
  • Lecture hall IV/4, 09:00–11:00, Božidar Šarler, Izpit: Termodinamika (Thermodynamics (TMDR))
  • Lecture hall IV/4, 09:00–11:00, Božidar Šarler, Izpit: Termodinamika (Thermodynamics (TMDR))
  • Lecture hall V/2, 09:00–11:00, Božidar Šarler, Izpit: Termodinamika (Thermodynamics (TMDR))
  • Lecture hall V/2, 09:00–11:00, Božidar Šarler, Izpit: Termodinamika (Thermodynamics (TMDR))
  • Lecture hall V/8, 09:00–11:00, Božidar Šarler, Izpit: Termodinamika (Thermodynamics (TMDR))
  • Lecture hall V/8, 09:00–11:00, Božidar Šarler, Izpit: Termodinamika (Thermodynamics (TMDR))
  • Lecture hall II/2, 09:30–13:30, Dekanat FS, Rektorat - Kolegij dekanov
  • Lecture hall II/5, 11:00–13:00, Primož Podržaj, Advanced Sensory Systems and Networks (6062-M) (Advanced Sensory Systems and Networks (ASSE))
  • Lecture hall V/8, 11:00–13:00, Tomaž Katrašnik , Izpit: Procesi v toplotnih motorjih (Processes in heat engines (PTMM))
  • Lecture hall V/8, 11:00–13:00, Tomaž Katrašnik , Izpit: Procesi v toplotnih motorjih (Processes in heat engines (PTMM))
  • Lecture hall IV/3A, 12:00–14:00, Vito Starc, Izpit: Letalska medicina in psihologija (Aviation medicine and psyhology (LMPP))
  • Lecture hall IV/3B, 12:00–14:00, Rok Vrabič, Izpit: Osnove mehatronike (Fundamentals of Mechatronics (2050))
  • Leskovarjeva conference room, 12:00–14:00, FS Dekanat , Zag. dr.
  • Lecture hall III/4, 13:00–15:00, Marko Nagode, Izpit: Obratovalna trdnost (Operational strength (OBTM))
  • Lecture hall III/4, 13:00–15:00, Marko Nagode, Izpit: Obratovalna trdnost (Operational strength (OBTM))
  • Lecture hall III/4, 13:00–15:00, Marko Nagode, Izpit: Fatigue Design (Fatigue Design (FTDE))
  • Lecture hall IV/3A, 14:00–16:00, Tomaž Katrašnik , Izpit: Motorji z notranjim zgorevanjem (Internal Combustion Engines (3052))
  • Lecture hall IV/3A, 14:00–16:00, Tomaž Katrašnik , Izpit: Motorji z notranjim zgorevanjem in elektromobilnost (Internal combustion engines and electromobility (MNZP))
  • Lecture hall III/4, 16:00–19:00, Martin Česnik, Izpit: Dinamika (Dynamics (DNMP))
  • Lecture hall III/4, 16:00–19:00, Martin Česnik, Izpit: Dinamika (Dynamics (DNMP))
  • Lecture hall IV/2, 16:00–19:00, Martin Česnik, Izpit: Dinamika (Dynamics (DNMP))
  • Lecture hall IV/2, 16:00–19:00, Martin Česnik, Izpit: Dinamika (Dynamics (DNMP))
  • Lecture hall IV/4, 16:00–19:00, Martin Česnik, Izpit: Dinamika (Dynamics (DNMP))
  • Lecture hall IV/4, 16:00–19:00, Martin Česnik, Izpit: Dinamika (Dynamics (DNMP))
  • Lecture hall V/2, 16:00–19:00, Martin Česnik, Izpit: Dinamika (Dynamics (DNMP))
  • Lecture hall V/2, 16:00–19:00, Martin Česnik, Izpit: Dinamika (Dynamics (DNMP))
  • Thursday, 18. June
  • Lecture hall II/3A, 07:00–20:00, Aleš Hočevar, Vzdrževanje
  • Lecture hall II/3B, 07:00–20:00, Aleš Hočevar, Vzdrževanje
  • Computer lecture room LNMS II/1, 08:00–14:00, Nikolaj Mole, Izpit: Analiza konstrukcij z MKE (FEM structural analysis (AKMM))
  • Computer lecture room LNMS II/1, 08:00–14:00, Nikolaj Mole, Izpit: Analiza konstrukcij z MKE (FEM structural analysis (AKMM))
  • Computer lecture room LNMS II/1, 08:00–14:00, Nikolaj Mole, Izpit: FEM Structural Analysis (FEM Structural Analysis (FEME))
  • Lecture hall IV/3A, 08:00–10:00, Jože Kutin, Izpit: Merilna tehnika (Measurement Techniques (2041))
  • Lecture hall V/2, 08:00–10:00, Tomaž Berlec, Izpit: Priprava proizvodnje (Production planning (PRPP))
  • Lecture hall V/2, 08:00–10:00, Tomaž Berlec, Izpit: Priprava proizvodnje (Production planning (3070))
  • Lecture hall V/2, 08:00–10:00, Tomaž Berlec, Izpit: Priprava proizvodnje (Production planning (PRPP))
  • Lecture hall II/5, 09:00–11:00, Igor Petrović, Letalski instrumenti (3078-V) izpit (Aircraft instrumentation (LTIP))
  • Lecture hall II/5, 09:00–11:00, Igor Petrović, Letalski instrumenti (3078-V) [dve oceni] izpit (Aircraft instrumentation (LTIP))
  • Lecture hall IV/4, 10:00–12:00, Mitjan Kalin, Izpit: Maziva in mazanje (Lubricants and lubrication (MZMP))
  • Lecture hall IV/4, 10:00–12:00, Mitjan Kalin, Izpit: Maziva in mazanje
  • Lecture hall IV/4, 10:00–12:00, Mitjan Kalin, Izpit: Obrabno obstojne površine
  • Lecture hall IV/4, 10:00–12:00, Mitjan Kalin, Izpit: Pogonski sklopi (Power Drives (3068))
  • Lecture hall IV/4, 10:00–12:00, Mitjan Kalin, Izpit: Poškodbe strojev in površin (Machine and surface damages (PSPP))
  • Lecture hall IV/4, 10:00–12:00, Mitjan Kalin, Izpit: Tehnična diagnostika
  • Lecture hall IV/4, 10:00–12:00, Mitjan Kalin, Izpit: Tehnologije vzdrževanja (Maintenance Technology (3101))
  • Lecture hall IV/4, 10:00–12:00, Mitjan Kalin, Izpit: Maziva in mazanje (Lubricants and lubrication (MZMP))
  • Lecture hall V/2, 10:00–12:00, Mitjan Kalin, Izpit: Maziva in mazanje (Lubricants and lubrication (MZMP))
  • Lecture hall V/2, 10:00–12:00, Mitjan Kalin, Izpit: Maziva in mazanje
  • Lecture hall V/2, 10:00–12:00, Mitjan Kalin, Izpit: Obrabno obstojne površine
  • Lecture hall V/2, 10:00–12:00, Mitjan Kalin, Izpit: Pogonski sklopi (Power Drives (3068))
  • Lecture hall V/2, 10:00–12:00, Mitjan Kalin, Izpit: Poškodbe strojev in površin (Machine and surface damages (PSPP))
  • Lecture hall V/2, 10:00–12:00, Mitjan Kalin, Izpit: Tehnična diagnostika
  • Lecture hall V/2, 10:00–12:00, Mitjan Kalin, Izpit: Tehnologije vzdrževanja (Maintenance Technology (3101))
  • Lecture hall V/2, 10:00–12:00, Mitjan Kalin, Izpit: Maziva in mazanje (Lubricants and lubrication (MZMP))
  • Lecture hall V/8, 10:00–12:00, Mihael Sekavčnik, Izpit: Energetski stroji in naprave - RRP (Energy machines and appliances - RRP (ESNR))
  • Leskovarjeva conference room, 11:00–14:00, FS Dekanat , Senat FS
  • Lecture hall V/8, 12:00–14:00, Franci Pušavec, Izpit: Izdelovalne tehnologije 1 (Production technologies 1 (IT1R))
  • Lecture hall V/8, 12:00–14:00, Franci Pušavec, Izpit: Izdelovalne tehnologije 1 (Production technologies 1 (IT1R))
  • Lecture hall IV/3A, 13:00–15:00, Andrej Grebenšek, Izpit: Letalska frazeologija (Aeronautical phraseology (LTFP))
  • Lecture hall IV/3B, 13:00–15:00, Karmen Štumberger , Izpit: Letalska frazeologija (Aviation phraseology (3136))
  • Lecture hall V/8, 14:00–16:00, Iztok Golobič, Izpit: Procesna tehnika (Process engineering (PCTM))
  • Lecture hall V/8, 14:00–16:00, Iztok Golobič, Izpit: Process Engineering (Process Engineering (PREE))
  • Lecture hall V/8, 14:00–16:00, Iztok Golobič, Izpit: Procesna tehnika (Process engineering (PCTM))
  • Lecture hall IV/4, 15:00–18:00, Valentina Hajdinjak, Aljoša Peperko, Darja Rupnik Poklukar , Izpit Integralske transformacije in Fourierova analiza (2012-U) (Integral transformations and Fourier analysis (ITFR))
  • Lecture hall V/2, 15:00–18:00, Valentina Hajdinjak, Aljoša Peperko, Darja Rupnik Poklukar , Izpit Integralske transformacije in Fourierova analiza (2012-U) (Integral transformations and Fourier analysis (ITFR))
  • Lecture hall V/8, 16:00–18:00, Andrej Kitanovski, Izpit: Hladilna tehnika in toplotne črpalke - MAG (Refrigeration and heat pumps - MAG (HTTM))
  • Lecture hall V/8, 16:00–18:00, Andrej Kitanovski, Izpit: Hladilna tehnika in toplotne črpalke - MAG (Refrigeration and heat pumps - MAG (HTTM))
  • Lecture hall V/8, 16:00–18:00, Andrej Kitanovski, Izpit: Hladilna tehnika in toplotne črpalke - PAP (Refrigeration and heat pumps - PAP (HTTP))
  • Lecture hall V/8, 16:00–18:00, Andrej Kitanovski, Izpit: Refrigeration and Heat Pumps - MAG (Refrigeration and Heat Pumps - MAG (RHPE))
  • Lecture hall V/8, 16:00–18:00, Andrej Kitanovski, Izpit: Hladilna tehnika in toplotne črpalke - PAP (Refrigeration and heat pumps - PAP (HTTP))
  • Friday, 19. June
  • Lecture hall II/3B, 07:00–20:00, Aleš Hočevar, Vzdrževanje
  • Lecture hall IV/3B, 08:00–10:00, Miha Brojan , Izpit: Dokumentacija v letalstvu (Aviation documentation (DVLP))
  • Lecture hall IV/4, 08:00–10:00, Tomaž Berlec, Izpit: Planiranje in krmiljenje proizvodnje
  • Lecture hall IV/4, 08:00–10:00, Tomaž Berlec, Izpit: Planiranje in organizacija proizvodnje (Production planning and organization (POPM))
  • Lecture hall IV/4, 08:00–10:00, Tomaž Berlec, Izpit: Planiranje in organizacija proizvodnje (Production planning and organization (POPM))
  • Lecture hall V/2, 08:00–10:00, Tomaž Berlec, Izpit: Planiranje in krmiljenje proizvodnje
  • Lecture hall V/2, 08:00–10:00, Tomaž Berlec, Izpit: Planiranje in organizacija proizvodnje (Production planning and organization (POPM))
  • Lecture hall V/2, 08:00–10:00, Tomaž Berlec, Izpit: Planiranje in organizacija proizvodnje (Production planning and organization (POPM))
  • Lecture hall V/2, 08:00–10:00, Franci Pušavec, Izpit: Tehnologije v proizvodnji 1 (Technologies in production 1 (TP1P))
  • Lecture hall V/2, 08:00–10:00, Franci Pušavec, Izpit: Tehnologije v proizvodnji 1 (Technologies in production 1 (TP1P))
  • Lecture hall V/8, 08:00–10:00, Marjan Jenko, Izpit: Elektrotehnika (Electrical engineering (ELTR))
  • Lecture hall V/8, 08:00–10:00, Marjan Jenko, Izpit: Elektrotehnika (Electrical engineering (ELTR))
  • Lecture hall V/8, 08:00–10:00, Franci Pušavec, Izpit: Tehnologije v proizvodnji 1 (Technologies in production 1 (TP1P))
  • Lecture hall V/8, 08:00–10:00, Franci Pušavec, Izpit: Tehnologije v proizvodnji 1 (Technologies in production 1 (TP1P))
  • Lecture hall II/2, 10:00–12:00, Jurij Prezelj, Izpit: Noise, Vibrations and Acoustic Engineering (Noise, Vibrations and Acoustic Engineering (NVAE))
  • Lecture hall II/2, 10:00–12:00, Jurij Prezelj, Izpit: Tehniška akustika (Technical acoustics (THAM))
  • Lecture hall II/2, 10:00–12:00, Jurij Prezelj, Izpit: Tehniška akustika (Technical acoustics (THAM))
  • Lecture hall II/5, 10:00–12:00, Primož Podržaj, Izpit: Krmiljenje mehatronskih sistemov (Mechatronic system control (KMSP))
  • Lecture hall III/4, 10:00–12:00, Iztok Golobič, Izpit: Prenos toplote (Heat transfer (PRTR))
  • Lecture hall III/4, 10:00–12:00, Iztok Golobič, Izpit: Prenos toplote (Heat transfer (PRTR))
  • Lecture hall IV/2, 10:00–12:00, Iztok Golobič, Izpit: Prenos toplote (Heat transfer (PRTR))
  • Lecture hall IV/2, 10:00–12:00, Iztok Golobič, Izpit: Prenos toplote (Heat transfer (PRTR))
  • Lecture hall IV/4, 10:00–12:00, Matija Jezeršek, Izpit: Mehatronika in laserske tehnologije (Mechatronics and laser technologies (MLTR))
  • Lecture hall V/2, 10:00–12:00, Matija Jezeršek, Izpit: Mehatronika in laserske tehnologije (Mechatronics and laser technologies (MLTR))
  • Lecture hall II/3A, 12:00–14:00, Matija Jezeršek, Izpit: Laserski sistemi (Laser Systems (2055))
  • Lecture hall III/4, 12:00–14:00, Mihael Sekavčnik, Izpit: Energetski stroji in naprave - PAP (Energy machines and appliances - PAP (ESNP))
  • Lecture hall III/4, 12:00–14:00, Mihael Sekavčnik, Izpit: Energetski stroji in naprave - PAP (Energy machines and appliances - PAP (ESNP))
  • Lecture hall IV/2, 12:00–15:00, Robert Kunc, Izpit: Geometric Product Specifications (Geometric Product Specifications (GPSE))
  • Lecture hall IV/2, 12:00–15:00, Robert Kunc, Izpit: Geometrijske specifikacije proizvodov (Geometric product specifications (GSPM))
  • Lecture hall IV/2, 12:00–15:00, Robert Kunc, Izpit: Geometrijske specifikacije proizvodov (Geometric product specifications (GSPM))
  • Lecture hall IV/4, 12:00–15:00, Robert Kunc, Izpit: Geometric Product Specifications (Geometric Product Specifications (GPSE))
  • Lecture hall IV/4, 12:00–15:00, Robert Kunc, Izpit: Geometrijske specifikacije proizvodov (Geometric product specifications (GSPM))
  • Lecture hall IV/4, 12:00–15:00, Robert Kunc, Izpit: Geometrijske specifikacije proizvodov (Geometric product specifications (GSPM))
  • Lecture hall III/4, 14:00–16:00, Uroš Stritih, Izpit: Ogrevanje, hlajenje in klimatizacija (Heating, Cooling and Air Conditioning (3056))
  • Lecture hall III/4, 14:00–16:00, Uroš Stritih, Izpit: Ogrevanje, ohlajevanje, prezračevanje, klimatizacija - PAP (Heating, refrigeration, ventilation, air-conditioning - PAP (OPKP))
  • Lecture hall III/4, 14:00–16:00, Uroš Stritih, Izpit: Stavbna tehnika
  • Lecture hall IV/2, 15:00–17:00, Davorin Kramar, Izpit: Inženirstvo kakovosti (Quality engineering (INKM))
  • Lecture hall IV/2, 15:00–17:00, Davorin Kramar, Izpit: Quality Engineering (Quality Engineering (QLEE))
  • Lecture hall IV/2, 15:00–17:00, Davorin Kramar, Izpit: Inženirstvo kakovosti (Quality engineering (INKM))

• 22. June – 28. June 2026

  • Monday, 22. June
  • Lecture hall II/3A, 07:00–20:00, Aleš Hočevar, Vzdrževanje
  • Lecture hall II/3B, 07:00–20:00, Aleš Hočevar, Vzdrževanje
  • Leskovarjeva conference room, 07:00–08:00, Dekanat FS, Joga
  • Lecture hall II/4, 08:00–13:30, Katja Pustovrh, Rezervacija - tehniški dan
  • Lecture hall II/5, 08:00–10:00, Uroš Stritih, Izpit: Sanitarna in požarna tehnika
  • Lecture hall III/2, 08:00–10:00, Tomaž Kek, Izpit: Metode preizkušanja v proizvodnji (Testing methods in production (MPPP))
  • Lecture hall III/2, 08:00–10:00, Tomaž Kek, Izpit: Metode preizkušanja v proizvodnji (Testing methods in production (MPPP))
  • Lecture hall III/4, 08:00–11:00, Franc Majdič, Izpit: Hidravlični industrijski sistemi (Industry hydraulic systems (HISP))
  • Lecture hall IV/4, 08:00–10:00, Lidija Slemenik Perše, Izpit: Mehanika nekovinskih gradiv (Mechanics of Non-metallic Materials (3100))
  • Lecture hall IV/4, 08:00–10:00, Lidija Slemenik Perše, Izpit: Nekovinski materiali - PAP (Non-metallic materials - PAP (NKMP))
  • Lecture hall IV/4, 08:00–10:00, Lidija Slemenik Perše, Izpit: Nekovinski materiali - PAP (Non-metallic materials - PAP (NKMP))
  • Lecture hall IV/4, 08:00–10:00, Lidija Slemenik Perše, Izpit: Polimerne tehnologije
  • Lecture hall V/2, 08:00–10:00, Lidija Slemenik Perše, Izpit: Mehanika nekovinskih gradiv (Mechanics of Non-metallic Materials (3100))
  • Lecture hall V/2, 08:00–10:00, Lidija Slemenik Perše, Izpit: Nekovinski materiali - PAP (Non-metallic materials - PAP (NKMP))
  • Lecture hall V/2, 08:00–10:00, Lidija Slemenik Perše, Izpit: Nekovinski materiali - PAP (Non-metallic materials - PAP (NKMP))
  • Lecture hall V/2, 08:00–10:00, Lidija Slemenik Perše, Izpit: Polimerne tehnologije
  • Lecture hall V/8, 08:00–10:00, Lidija Slemenik Perše, Izpit: Mehanika nekovinskih gradiv (Mechanics of Non-metallic Materials (3100))
  • Lecture hall V/8, 08:00–10:00, Lidija Slemenik Perše, Izpit: Nekovinski materiali - PAP (Non-metallic materials - PAP (NKMP))
  • Lecture hall V/8, 08:00–10:00, Lidija Slemenik Perše, Izpit: Nekovinski materiali - PAP (Non-metallic materials - PAP (NKMP))
  • Lecture hall V/8, 08:00–10:00, Lidija Slemenik Perše, Izpit: Polimerne tehnologije
  • Lecture hall II/2, 10:00–12:00, Andrej Grebenšek, Izpit: Letalska navigacija 2 (Air navigaton 2 (LN2P))
  • Lecture hall II/2, 10:00–12:00, Andrej Grebenšek, Izpit: Letalska navigacija 2 (Aircraft navigation 2 (3139))
  • Lecture hall II/5, 10:00–12:00, Drago Bračun, Izpit: Industrijska avtomatizacija (Industrial Automation (3082))
  • Lecture hall II/5, 10:00–12:00, Drago Bračun, Izpit: Strojni vid (Machine vision (STVP))
  • Lecture hall III/2, 10:00–13:00, Niko Herakovič, Izpit: Montažni in strežni sistemi (Assembly and handling systems (MSSM))
  • Lecture hall III/2, 10:00–13:00, Niko Herakovič, Izpit: Montažni in strežni sistemi (Assembly and handling systems (MSSM))
  • Lecture hall IV/2, 10:00–12:00, Jurij Prezelj, Izpit: Uvod v akustiko (Introduction to acoustics (UVAP))
  • Lecture hall IV/2, 10:00–12:00, Jurij Prezelj, Izpit: Uvod v akustiko (Introduction to acoustics (UVAP))
  • Lecture hall IV/4, 10:00–12:00, Nikola Vukašinović, Izpit: Metodika konstruiranja - RRP (Engineerig Design Methodology - RRP (MTKR))
  • Lecture hall IV/4, 10:00–12:00, Nikola Vukašinović, Izpit: Metodika konstruiranja (Design Methodology (2042))
  • Lecture hall IV/4, 10:00–12:00, Nikola Vukašinović, Izpit: Metodika konstruiranja - RRP (Engineerig Design Methodology - RRP (MTKR))
  • Lecture hall V/2, 10:00–12:00, Nikola Vukašinović, Izpit: Metodika konstruiranja - RRP (Engineerig Design Methodology - RRP (MTKR))
  • Lecture hall V/2, 10:00–12:00, Nikola Vukašinović, Izpit: Metodika konstruiranja (Design Methodology (2042))
  • Lecture hall V/2, 10:00–12:00, Nikola Vukašinović, Izpit: Metodika konstruiranja - RRP (Engineerig Design Methodology - RRP (MTKR))
  • Lecture hall V/8, 10:00–12:00, Nikola Vukašinović, Izpit: Metodika konstruiranja - RRP (Engineerig Design Methodology - RRP (MTKR))
  • Lecture hall V/8, 10:00–12:00, Nikola Vukašinović, Izpit: Metodika konstruiranja (Design Methodology (2042))
  • Lecture hall V/8, 10:00–12:00, Nikola Vukašinović, Izpit: Metodika konstruiranja - RRP (Engineerig Design Methodology - RRP (MTKR))
  • Lecture hall II/2, 12:00–14:00, Primož Podržaj, Izpit: Mehatronski aktuatorji (Mechatronic actuators (MHAP))
  • Lecture hall II/2, 12:00–14:00, Primož Podržaj, Izpit: Mehatronski aktuatorji (Mechatronic actuators (MHAP))
  • Lecture hall III/4, 12:00–14:00, Boris Jerman, Izpit: Transportna sredstva in sistemi (Material handling equipment and systems (TSSP))
  • Lecture hall III/4, 12:00–14:00, Boris Jerman, Izpit: Transportna sredstva in sistemi (Material handling equipment and systems (TSSP))
  • Lecture hall IV/4, 12:00–14:00, Miha Brojan , Izpit: Mehanika leta letala (Mechanics of flight (MLLP))
  • Lecture hall IV/4, 12:00–14:00, Miha Brojan , Izpit: Trdnost (Strength of materials (TRDR))
  • Lecture hall IV/4, 12:00–14:00, Miha Brojan , Izpit: Trdnost (Strength of materials (TRDR))
  • Lecture hall IV/4, 12:00–14:00, Miha Brojan , Izpit: Mehanika leta letala (Mechanics of flight (MLLP))
  • Lecture hall V/2, 12:00–14:00, Miha Brojan , Izpit: Mehanika leta letala (Mechanics of flight (MLLP))
  • Lecture hall V/2, 12:00–14:00, Miha Brojan , Izpit: Trdnost (Strength of materials (TRDR))
  • Lecture hall V/2, 12:00–14:00, Miha Brojan , Izpit: Trdnost (Strength of materials (TRDR))
  • Lecture hall V/2, 12:00–14:00, Miha Brojan , Izpit: Mehanika leta letala (Mechanics of flight (MLLP))
  • Lecture hall V/8, 12:00–14:00, Miha Brojan , Izpit: Mehanika leta letala (Mechanics of flight (MLLP))
  • Lecture hall V/8, 12:00–14:00, Miha Brojan , Izpit: Trdnost (Strength of materials (TRDR))
  • Lecture hall V/8, 12:00–14:00, Miha Brojan , Izpit: Trdnost (Strength of materials (TRDR))
  • Lecture hall V/8, 12:00–14:00, Miha Brojan , Izpit: Mehanika leta letala (Mechanics of flight (MLLP))
  • Lecture hall III/2, 13:00–15:00, Božidar Šarler, Izpit: Večfazni sistemi (Multiphase Systems (VFSM))
  • Lecture hall III/2, 13:00–15:00, Božidar Šarler, Izpit: Večfazni sistemi (Multiphase Systems (VFSM))
  • Lecture hall V/8, 14:00–16:00, Marko Nagode, Izpit: Strojni elementi 2 - PAP (Machine elements 2 - PAP (SE2P))
  • Lecture hall V/8, 14:00–16:00, Marko Nagode, Izpit: Strojni elementi 2 - PAP (Machine elements 2 - PAP (SE2P))
  • Lecture hall IV/4, 15:00–17:00, Andrej Senegačnik, Izpit: Chemical Energy Carriers (Chemical Energy Carriers (CECE))
  • Lecture hall IV/4, 15:00–17:00, Andrej Senegačnik, Izpit: Kemični nosilci energije (Chemical energy carriers (KNEM))
  • Lecture hall IV/4, 15:00–17:00, Andrej Senegačnik, Izpit: Kemični nosilci energije (Chemical energy carriers (KNEM))
  • Leskovarjeva conference room, 18:00–19:30, MPZ LIPA , Vaje zbora Lipa zelenela je...
  • Tuesday, 23. June
  • Lecture hall II/3A, 07:00–20:00, Aleš Hočevar, Vzdrževanje
  • Lecture hall II/3B, 07:00–20:00, Aleš Hočevar, Vzdrževanje
  • Lecture hall II/5, 08:00–10:00, Iztok Golobič, Izpit: Procesni sistemi (Process systems (PRSP))
  • Lecture hall II/5, 08:00–10:00, Iztok Golobič, Izpit: Procesni sistemi (Process systems (PRSP))
  • Lecture hall III/2, 08:00–11:00, Niko Herakovič, Izpit: Proizvodno inženirstvo (Production engineering (PRIR))
  • Lecture hall III/2, 08:00–11:00, Niko Herakovič, Izpit: Proizvodno inženirstvo (Production Engineering (2054))
  • Lecture hall III/2, 08:00–11:00, Niko Herakovič, Izpit: Tehnologija montaže (Assembly technology (THMP))
  • Lecture hall III/2, 08:00–11:00, Niko Herakovič, Izpit: Tehnologija montaže (Assembly technology (THMP))
  • Lecture hall III/4, 08:00–11:00, Niko Herakovič, Izpit: Proizvodno inženirstvo (Production engineering (PRIR))
  • Lecture hall III/4, 08:00–11:00, Niko Herakovič, Izpit: Proizvodno inženirstvo (Production Engineering (2054))
  • Lecture hall III/4, 08:00–11:00, Niko Herakovič, Izpit: Tehnologija montaže (Assembly technology (THMP))
  • Lecture hall III/4, 08:00–11:00, Niko Herakovič, Izpit: Tehnologija montaže (Assembly technology (THMP))
  • Lecture hall IV/4, 08:00–10:00, Rok Petkovšek, Izpit: Fotonika in laserski izvori (Photonics and laser sources (FLIM))
  • Lecture hall IV/4, 08:00–10:00, Rok Petkovšek, Izpit: Fotonika in laserski izvori (Photonics and laser sources (FLIM))
  • Lecture hall IV/4, 08:00–10:00, Rok Petkovšek, Izpit: Photonics and Laser Sources (Photonics and Laser Sources (PLSE))
  • Lecture hall V/8, 08:00–10:00, Franci Pušavec, Izpit: CAM sistemi (CAM systems (CAMM))
  • Lecture hall V/8, 08:00–10:00, Franci Pušavec, Izpit: CAM sistemi (CAM systems (CAMM))
  • Lecture hall I/4A, 09:00–11:00, Študentski referat ŠR , Matej Rostohar - seminar I
  • Lecture hall II/5, 10:00–12:00, Ciril Arkar, Izpit: Obnovljivi viri energije (Renewable Energy Sources (3059))
  • Lecture hall II/5, 10:00–12:00, Ciril Arkar, Izpit: Solarni inženiring (Solar energy engineering (SLIP))
  • Lecture hall IV/2, 10:00–12:00, Matija Jezeršek, Izpit: Laser Processing Technology (Laser Processing Technology (LPTE))
  • Lecture hall IV/2, 10:00–12:00, Matija Jezeršek, Izpit: Laserska obdelovalna tehnologija (Laser processing technology (LOTM))
  • Lecture hall IV/2, 10:00–12:00, Matija Jezeršek, Izpit: Laserska obdelovalna tehnologija (Laser processing technology (LOTM))
  • Lecture hall IV/4, 10:00–12:00, Marko Nagode, Izpit: Strojni elementi 2 - RRP (Machine elements 2 - RRP (SE2R))
  • Lecture hall IV/4, 10:00–12:00, Marko Nagode, Izpit: Strojni elementi 2 - RRP (Machine elements 2 - RRP (SE2R))
  • Lecture hall V/2, 10:00–12:00, Marko Nagode, Izpit: Strojni elementi 2 - RRP (Machine elements 2 - RRP (SE2R))
  • Lecture hall V/2, 10:00–12:00, Marko Nagode, Izpit: Strojni elementi 2 - RRP (Machine elements 2 - RRP (SE2R))
  • Lecture hall V/8, 10:00–12:00, Marko Nagode, Izpit: Strojni elementi 2 - RRP (Machine elements 2 - RRP (SE2R))
  • Lecture hall V/8, 10:00–12:00, Marko Nagode, Izpit: Strojni elementi 2 - RRP (Machine elements 2 - RRP (SE2R))
  • UL FMF, 10:00–12:00, Gregor Skok , Izpit: Letalska meteorologija (Aeronautical meteorology (LTMP))
  • UL FMF, 10:00–12:00, Gregor Skok , Izpit: Letalska meteorologija (Aeronautical meteorology (LTMP))
  • Leskovarjeva conference room, 11:00–13:00, FS Dekanat , Zag. dr. Klanjšček
  • Lecture hall IV/4, 12:00–14:00, Miha Brojan , Izpit: Poročanje v strojništvu - PAP (Engineering reporting - PAP (PVSP))
  • Lecture hall IV/4, 12:00–14:00, Miha Brojan , Izpit: Poročanje v strojništvu - PAP (Engineering reporting - PAP (PVSP))
  • Lecture hall V/2, 12:00–14:00, Miha Brojan , Izpit: Poročanje v strojništvu - PAP (Engineering reporting - PAP (PVSP))
  • Lecture hall V/2, 12:00–14:00, Miha Brojan , Izpit: Poročanje v strojništvu - PAP (Engineering reporting - PAP (PVSP))
  • Lecture hall V/8, 12:00–14:00, Miha Brojan , Izpit: Poročanje v strojništvu - PAP (Engineering reporting - PAP (PVSP))
  • Lecture hall V/8, 12:00–14:00, Miha Brojan , Izpit: Poročanje v strojništvu - PAP (Engineering reporting - PAP (PVSP))
  • Lecture hall III/4, 14:00–16:00, Mitjan Kalin, Izpit: Nanotechnologies (Nanotechnologies (NNTE))
  • Lecture hall III/4, 14:00–16:00, Mitjan Kalin, Izpit: Nanotehnologije (Nanotechnologies (NNTM))
  • Lecture hall III/4, 14:00–16:00, Mitjan Kalin, Izpit: Nanotehnologije (Nanotechnologies (NNTM))
  • Lecture hall IV/4, 14:00–16:00, Roman Šturm, Izpit: Heat Treatment (Heat Treatment (HTME))
  • Lecture hall IV/4, 14:00–16:00, Roman Šturm, Izpit: Konstrukcijska gradiva (Construction Materials (3104))
  • Lecture hall IV/4, 14:00–16:00, Roman Šturm, Izpit: Materiali v energetiki in procesnem strojništvu
  • Lecture hall IV/4, 14:00–16:00, Roman Šturm, Izpit: Načrtovanje toplotne obdelave (Heat treatment planning (NTOP))
  • Lecture hall IV/4, 14:00–16:00, Roman Šturm, Izpit: Načrtovanje toplotne obdelave
  • Lecture hall V/2, 14:00–16:00, Roman Šturm, Izpit: Heat Treatment (Heat Treatment (HTME))
  • Lecture hall V/2, 14:00–16:00, Roman Šturm, Izpit: Konstrukcijska gradiva (Construction Materials (3104))
  • Lecture hall V/2, 14:00–16:00, Roman Šturm, Izpit: Materiali v energetiki in procesnem strojništvu
  • Lecture hall V/2, 14:00–16:00, Roman Šturm, Izpit: Načrtovanje toplotne obdelave (Heat treatment planning (NTOP))
  • Lecture hall V/2, 14:00–16:00, Roman Šturm, Izpit: Načrtovanje toplotne obdelave
  • Lecture hall V/8, 14:00–16:00, Roman Šturm, Izpit: Heat Treatment (Heat Treatment (HTME))
  • Lecture hall V/8, 14:00–16:00, Roman Šturm, Izpit: Konstrukcijska gradiva (Construction Materials (3104))
  • Lecture hall V/8, 14:00–16:00, Roman Šturm, Izpit: Materiali v energetiki in procesnem strojništvu
  • Lecture hall V/8, 14:00–16:00, Roman Šturm, Izpit: Načrtovanje toplotne obdelave (Heat treatment planning (NTOP))
  • Lecture hall V/8, 14:00–16:00, Roman Šturm, Izpit: Načrtovanje toplotne obdelave
  • Wednesday, 24. June
  • Lecture hall II/3A, 07:00–20:00, Aleš Hočevar, Vzdrževanje
  • Lecture hall II/3B, 07:00–20:00, Aleš Hočevar, Vzdrževanje
  • Lecture hall III/2, 08:00–10:00, Miha Brojan , Izpit: Mechanics of Light-weight Structures (Mechanics of Light-weight Structures (MLSE))
  • Lecture hall III/2, 08:00–10:00, Miha Brojan , Izpit: Mehanika lahkih struktur (Mechanics of light-weight structures (MLSM))
  • Lecture hall III/2, 08:00–10:00, Miha Brojan , Izpit: Mehanika lahkih struktur (Mechanics of light-weight structures (MLSM))
  • Lecture hall III/3A, 08:00–11:00, Miha Boltežar, Izpit: Dinamika togih teles (Rigid Body Dynamics (2044))
  • Lecture hall III/4, 08:00–10:00, Drago Bračun, Izpit: Krmiljenje in statistični nadzor proizvodnje (Control and statistical supervision in manufacturing (KSNP))
  • Lecture hall III/4, 08:00–10:00, Drago Bračun, Izpit: Krmiljenje in statistični nadzor proizvodnje (Control and statistical supervision in manufacturing (KSNP))
  • Lecture hall IV/2, 08:00–10:00, Nikola Vukašinović, Izpit: Računalniško modeliranje geometrije (Computer aided modelling of geometry (RMGP))
  • Lecture hall IV/2, 08:00–10:00, Nikola Vukašinović, Izpit: Računalniško modeliranje geometrije (Computer aided modelling of geometry (RMGP))
  • Lecture hall IV/3A, 08:00–10:00, Igor Petrović, Izpit: Aeromehanika in letalske konstrukcije (Aeromechanics and airframes (ALKP))
  • Lecture hall IV/3A, 08:00–10:00, Igor Petrović, Izpit: Aeromehanika in letalske konstrukcije (Aeromechanics and airframes (ALKP))
  • Lecture hall V/2, 08:00–10:00, Nikola Vukašinović, Izpit: Računalniško modeliranje geometrije (Computer aided modelling of geometry (RMGP))
  • Lecture hall V/2, 08:00–10:00, Nikola Vukašinović, Izpit: Računalniško modeliranje geometrije (Computer aided modelling of geometry (RMGP))
  • Lecture hall V/8, 08:00–10:00, Nikola Vukašinović, Izpit: Računalniško modeliranje geometrije (Computer aided modelling of geometry (RMGP))
  • Lecture hall V/8, 08:00–10:00, Nikola Vukašinović, Izpit: Računalniško modeliranje geometrije (Computer aided modelling of geometry (RMGP))
  • Lecture hall II/2, 09:00–11:00, Rok Vrabič, Izpit: Osnove računalniške obdelave podatkov
  • Lecture hall II/5, 10:00–12:00, Jernej Klemenc, Izpit: Konstruiranje v industriji (System design in the industry (KVIP))
  • Lecture hall II/5, 10:00–12:00, Jernej Klemenc, Izpit: Konstruiranje v industriji (System design in the industry (KVIP))
  • Lecture hall III/2, 10:00–13:00, Janko Slavič, Izpit: Procesiranje signalov (Signal processing (PRSM))
  • Lecture hall III/2, 10:00–13:00, Janko Slavič, Izpit: Procesiranje signalov (Signal processing (PRSM))
  • Lecture hall V/2, 10:00–12:00, Andrej Senegačnik, Izpit: Termo in jedrski energetski sistemi (Thermal and nuclear power systems (TJEP))
  • Lecture hall V/2, 10:00–12:00, Andrej Senegačnik, Izpit: Termo in jedrski energetski sistemi (Thermal and nuclear power systems (TJEP))
  • Lecture hall V/8, 10:00–12:00, Iztok Golobič, Izpit: Okoljsko inženirstvo (Environmental engineering (OKIR))
  • Lecture hall III/4, 11:00–14:00, Robert Kunc, Izpit: Analiza in sinteza mehanizmov (Mechanisms analysis and synthesis (ASMP))
  • Lecture hall III/4, 11:00–14:00, Robert Kunc, Izpit: Finomehanika
  • Lecture hall III/4, 11:00–14:00, Andrej Žerovnik , Izpit: Logistika prometa (Traffic Logistics (3069))
  • Lecture hall III/4, 11:00–14:00, Robert Kunc, Izpit: Mehanizmi (Mechanisms (3064))
  • Lecture hall III/4, 11:00–14:00, Andrej Žerovnik , Izpit: Vozila (Vehicles (3067))
  • Lecture hall IV/2, 12:00–14:00, Drago Bračun, Izpit: Programirljivi logični krmilniki (Programmable logic controllers (PLKP))
  • Lecture hall IV/2, 12:00–14:00, Drago Bračun, Izpit: Programirljivi logični krmilniki (Programmable logic controllers (PLKP))
  • Lecture hall IV/4, 12:00–14:00, Darja Rupnik Poklukar , Izpit: Parcialne diferencialne enačbe, kompleksna analiza in optimizacija (Partial differential equations, complex analysis and optimization (PDER))
  • Lecture hall IV/4, 12:00–14:00, Darja Rupnik Poklukar , Izpit: Parcialne diferencialne enačbe, kompleksna analiza in optimizacija (Partial differential equations, complex analysis and optimization (PDER))
  • Lecture hall V/2, 12:00–14:00, Darja Rupnik Poklukar , Izpit: Parcialne diferencialne enačbe, kompleksna analiza in optimizacija (Partial differential equations, complex analysis and optimization (PDER))
  • Lecture hall V/2, 12:00–14:00, Darja Rupnik Poklukar , Izpit: Parcialne diferencialne enačbe, kompleksna analiza in optimizacija (Partial differential equations, complex analysis and optimization (PDER))
  • Lecture hall V/8, 12:00–14:00, Darja Rupnik Poklukar , Izpit: Parcialne diferencialne enačbe, kompleksna analiza in optimizacija (Partial differential equations, complex analysis and optimization (PDER))
  • Lecture hall V/8, 12:00–14:00, Darja Rupnik Poklukar , Izpit: Parcialne diferencialne enačbe, kompleksna analiza in optimizacija (Partial differential equations, complex analysis and optimization (PDER))
  • Lecture hall II/2, 13:00–15:00, Tomaž Pepelnjak, Izpit: Napredni preoblikovalni procesi (Advanced forming processes (NPPM))
  • Lecture hall II/2, 13:00–15:00, Tomaž Pepelnjak, Izpit: Napredni preoblikovalni procesi (Advanced forming processes (NPPM))
  • Lecture hall IV/4, 14:00–16:00, Roman Šturm, Izpit: Kovinski materiali - RRP (Metals - RRP (KVMR))
  • Lecture hall IV/4, 14:00–16:00, Roman Šturm, Izpit: Kovinski materiali - RRP (Metals - RRP (KVMR))
  • Lecture hall V/2, 14:00–16:00, Roman Šturm, Izpit: Kovinski materiali - RRP (Metals - RRP (KVMR))
  • Lecture hall V/2, 14:00–16:00, Roman Šturm, Izpit: Kovinski materiali - RRP (Metals - RRP (KVMR))
  • Lecture hall V/8, 14:00–16:00, Roman Šturm, Izpit: Kovinski materiali - RRP (Metals - RRP (KVMR))
  • Lecture hall V/8, 14:00–16:00, Roman Šturm, Izpit: Kovinski materiali - RRP (Metals - RRP (KVMR))
  • Thursday, 25. June
  • Lecture hall II/3A, 07:00–20:00, Aleš Hočevar, Vzdrževanje
  • Lecture hall II/3B, 07:00–20:00, Aleš Hočevar, Vzdrževanje
  • Friday, 26. June
  • Lecture hall II/3A, 07:00–20:00, Aleš Hočevar, Vzdrževanje
  • Lecture hall II/3B, 07:00–20:00, Aleš Hočevar, Vzdrževanje

• 29. June – 5. July 2026

  • Monday, 29. June
  • Lecture hall II/2, 07:00–10:00, Katja Pustovrh, PRT
  • Lecture hall II/3A, 07:00–20:00, Aleš Hočevar, Vzdrževanje
  • Lecture hall II/3B, 07:00–20:00, Aleš Hočevar, Vzdrževanje
  • Leskovarjeva conference room, 07:00–08:00, Dekanat FS, Joga
  • Computer lecture room LNMS II/1, 08:00–16:00, Nikolaj Mole, Izpit: Metode numeričnega modeliranja (Numerical modelling methods (MNMR))
  • Computer lecture room LNMS II/1, 08:00–16:00, Nikolaj Mole, Izpit: Metode numeričnega modeliranja (Numerical Modelling Methods (2040))
  • Lecture hall II/2, 08:00–10:00, Damjan Klobčar, Izpit: Spajanje in toplotno rezanje materialov
  • Lecture hall V/2, 08:00–10:00, Ciril Arkar, Izpit: Pametna mesta (Smart cities (PMMM))
  • Lecture hall V/2, 08:00–10:00, Ciril Arkar, Izpit: Pametna mesta (Smart cities (PMMM))
  • Lecture hall V/8, 08:00–10:00, Jože Kutin, Izpit: Merilni praktikum (Measurement practicum (MRPP))
  • Lecture hall V/8, 08:00–10:00, Jože Kutin, Izpit: Merilni praktikum (Measurement practicum (MRPP))
  • Lecture hall II/2, 10:00–13:00, Marko Hočevar, Izpit: Hidro in vetrni energetski sistemi (Hydro and wind energy systems (HVEP))
  • Lecture hall II/2, 10:00–13:00, Marko Hočevar, Izpit: Hidroenergetski sistemi (Hydropower Systems (3115))
  • Lecture hall II/4, 10:00–12:00, Patrick Vlačič , Izpit: Letalsko pravo (Air law (LTPP))
  • Lecture hall IV/4, 10:00–12:00, Mojca Volk , Izpit: Inoviranje v strojništvu - RRP (Innovation in Mechanical Engineering - RRP (IVSR))
  • Lecture hall IV/4, 10:00–12:00, Mojca Volk , Izpit: Inoviranje v strojništvu - RRP (Innovation in Mechanical Engineering - RRP (IVSR))
  • Lecture hall V/2, 10:00–12:00, Božidar Šarler, Izpit: Computational Fluid Dynamics (Computational Fluid Dynamics (CFDE))
  • Lecture hall V/2, 10:00–12:00, Božidar Šarler, Izpit: Računalniška dinamika tekočin (Computational fluid dynamics (RDTM))
  • Lecture hall V/2, 10:00–12:00, Božidar Šarler, Izpit: Računalniška dinamika tekočin (Computational fluid dynamics (RDTM))
  • Lecture hall V/8, 10:00–12:00, Mojca Volk , Izpit: Inoviranje v strojništvu - RRP (Innovation in Mechanical Engineering - RRP (IVSR))
  • Lecture hall V/8, 10:00–12:00, Mojca Volk , Izpit: Inoviranje v strojništvu - RRP (Innovation in Mechanical Engineering - RRP (IVSR))
  • Lecture hall III/2, 12:00–14:00, Tomaž Berlec, Izpit: Načrtovanje in vodenje proizvodnje (Production planning and management (3078))
  • Lecture hall III/2, 12:00–14:00, Tomaž Berlec, Izpit: Vodenje proizvodnje (Production leading (VDPP))
  • Lecture hall III/4, 12:00–15:00, Gregor Čepon, Izpit: Dinamika strojev in konstrukcij (Dynamics of machines and structures (DSKM))
  • Lecture hall III/4, 12:00–15:00, Gregor Čepon, Izpit: Dinamika strojev in konstrukcij (Dynamics of machines and structures (DSKM))
  • Lecture hall IV/4, 12:00–14:00, Lidija Slemenik Perše, Izpit: Nekovinski materiali - RRP (Non-metallic materials - RRP (NKMR))
  • Lecture hall IV/4, 12:00–14:00, Lidija Slemenik Perše, Izpit: Nekovinski materiali - RRP (Non-metallic materials - RRP (NKMR))
  • Lecture hall V/2, 12:00–14:00, Lidija Slemenik Perše, Izpit: Nekovinski materiali - RRP (Non-metallic materials - RRP (NKMR))
  • Lecture hall V/2, 12:00–14:00, Lidija Slemenik Perše, Izpit: Nekovinski materiali - RRP (Non-metallic materials - RRP (NKMR))
  • Lecture hall V/8, 12:00–14:00, Lidija Slemenik Perše, Izpit: Nekovinski materiali - RRP (Non-metallic materials - RRP (NKMR))
  • Lecture hall V/8, 12:00–14:00, Lidija Slemenik Perše, Izpit: Nekovinski materiali - RRP (Non-metallic materials - RRP (NKMR))
  • Lecture hall IV/4, 14:00–16:00, Božidar Šarler, Izpit: Termofluidika (Thermofluidics (TMFP))
  • Lecture hall IV/4, 14:00–16:00, Božidar Šarler, Izpit: Termofluidika (Thermofluidics (TMFP))
  • Lecture hall V/2, 14:00–16:00, Božidar Šarler, Izpit: Termofluidika (Thermofluidics (TMFP))
  • Lecture hall V/2, 14:00–16:00, Božidar Šarler, Izpit: Termofluidika (Thermofluidics (TMFP))
  • Lecture hall V/8, 14:00–16:00, Božidar Šarler, Izpit: Termofluidika (Thermofluidics (TMFP))
  • Lecture hall V/8, 14:00–16:00, Božidar Šarler, Izpit: Termofluidika (Thermofluidics (TMFP))
  • Lecture hall II/5, 15:00–18:00, Edvard Govekar, Izpit: Additive Technologies (Additive Technologies (ADTE))
  • Lecture hall II/5, 15:00–18:00, Edvard Govekar, Izpit: Aditivne tehnologije (Additive technologies (ADTM))
  • Lecture hall II/5, 15:00–18:00, Edvard Govekar, Izpit: Aditivne tehnologije (Additive technologies (ADTM))
  • Tuesday, 30. June
  • Lecture hall II/3A, 07:00–20:00, Aleš Hočevar, Vzdrževanje
  • Lecture hall II/3B, 07:00–20:00, Aleš Hočevar, Vzdrževanje
  • Lecture hall IV/2, 07:00–10:00, Aljoša Peperko, Izpit: Navadne diferencialne enačbe in linearna algebra - PAP (Ordinary differential equations and linear algebra - PAP (NDEP))
  • Lecture hall IV/2, 07:00–10:00, Aljoša Peperko, Izpit: Navadne diferencialne enačbe in linearna algebra - PAP (Ordinary differential equations and linear algebra - PAP (NDEP))
  • Lecture hall IV/2, 07:00–10:00, Aljoša Peperko, Izpit: Navadne diferencialne enačbe - PAP (Ordinary Differential Equations - PAP (NDEP))
  • Lecture hall IV/4, 07:00–10:00, Aljoša Peperko, Izpit: Navadne diferencialne enačbe in linearna algebra - PAP (Ordinary differential equations and linear algebra - PAP (NDEP))
  • Lecture hall IV/4, 07:00–10:00, Aljoša Peperko, Izpit: Navadne diferencialne enačbe in linearna algebra - PAP (Ordinary differential equations and linear algebra - PAP (NDEP))
  • Lecture hall IV/4, 07:00–10:00, Aljoša Peperko, Izpit: Navadne diferencialne enačbe - PAP (Ordinary Differential Equations - PAP (NDEP))
  • Lecture hall V/2, 07:00–10:00, Aljoša Peperko, Izpit: Navadne diferencialne enačbe in linearna algebra - PAP (Ordinary differential equations and linear algebra - PAP (NDEP))
  • Lecture hall V/2, 07:00–10:00, Aljoša Peperko, Izpit: Navadne diferencialne enačbe in linearna algebra - PAP (Ordinary differential equations and linear algebra - PAP (NDEP))
  • Lecture hall V/2, 07:00–10:00, Aljoša Peperko, Izpit: Navadne diferencialne enačbe - PAP (Ordinary Differential Equations - PAP (NDEP))
  • Lecture hall V/8, 07:00–10:00, Aljoša Peperko, Izpit: Navadne diferencialne enačbe in linearna algebra - PAP (Ordinary differential equations and linear algebra - PAP (NDEP))
  • Lecture hall V/8, 07:00–10:00, Aljoša Peperko, Izpit: Navadne diferencialne enačbe in linearna algebra - PAP (Ordinary differential equations and linear algebra - PAP (NDEP))
  • Lecture hall V/8, 07:00–10:00, Aljoša Peperko, Izpit: Navadne diferencialne enačbe - PAP (Ordinary Differential Equations - PAP (NDEP))
  • Lecture hall II/2, 08:00–10:00, Marko Hočevar, Izpit: Trajnostni viri električne energije (Sustainable sources of electric energy (TVEM))
  • Lecture hall II/2, 08:00–10:00, Marko Hočevar, Izpit: Trajnostni viri električne energije (Sustainable sources of electric energy (TVEM))
  • Lecture hall II/2, 08:00–10:00, Marko Hočevar, Izpit: Sustainable Sources of Electric Energy (Sustainable Sources of Electric Energy (SSEE))
  • Lecture hall II/5, 08:00–10:00, Radivoj Kikelj , Izpit: Konstruiranje letal 1 (Aircraft design 1 (KL1P))
  • Lecture hall II/5, 08:00–10:00, Radivoj Kikelj , Izpit: Konstruiranje letal 1 (Aircraft design 1 (KL1P))
  • Lecture hall III/2, 08:00–10:00, Ciril Arkar, Izpit: Stavbna fizika in notranje okolje (Building physics and indoor environment quality (SFNP))
  • Lecture hall III/2, 08:00–10:00, Ciril Arkar, Izpit: Stavbna fizika in notranje okolje (Building physics and indoor environment quality (SFNP))
  • Lecture hall IV/3B, 08:00–10:00, Nikola Vukašinović, Izpit: Konstrukcije iz nekovinskih gradiv
  • Leskovarjeva conference room, 08:00–10:00, FS Dekanat , PR
  • Lecture hall II/2, 10:00–12:00, Jurij Prezelj, Izpit: Gonilniki tekočin (Fluid Movers (3051))
  • Lecture hall II/2, 10:00–12:00, Jurij Prezelj, Izpit: Sistemi komprimiranih medijev in vakuuma (Systems for compressed gases and vacuum (SKMP))
  • Lecture hall III/4, 10:00–12:00, Boris Jerman, Izpit: Lahke konstrukcije (Lightweight structures (LKNM))
  • Lecture hall III/4, 10:00–12:00, Boris Jerman, Izpit: Lahke konstrukcije (Lightweight structures (LKNM))
  • Lecture hall IV/2, 10:00–12:00, Tomaž Berlec, Izpit: Investicijski inženiring (Investment engineering (INIP))
  • Lecture hall IV/2, 10:00–12:00, Tomaž Berlec, Izpit: Investicijski inženiring in vodenje projektov (Investment Engineering and Project Management (3062))
  • Lecture hall IV/4, 10:00–12:00, Uroš Stritih, Izpit: Air-conditioning, Heating, Refrigeration, Ventilation (Air-conditioning, Heating, Refrigeration, Ventilation (AHRE))
  • Lecture hall IV/4, 10:00–12:00, Uroš Stritih, Izpit: Klimatizacija, ogrevanje, ohlajevanje, prezračevanje (Air-conditioning, heating, refrigeration, ventilation (KOOM))
  • Lecture hall IV/4, 10:00–12:00, Uroš Stritih, Izpit: Klimatizacija, ogrevanje, ohlajevanje, prezračevanje (Air-conditioning, heating, refrigeration, ventilation (KOOM))
  • Lecture hall V/2, 10:00–12:00, Robert Kunc, Izpit: Dokumentacija in dokumentarni sistemi (Documentation and document management system (DDSP))
  • Lecture hall V/2, 10:00–12:00, Robert Kunc, Izpit: Dokumentacija in dokumentarni sistemi (Documentation and document management system (DDSP))
  • Lecture hall V/8, 10:00–12:00, Iztok Golobič, Izpit: Energijski in snovni tokovi v industriji (Energy and material flows in industry (ESTP))
  • Lecture hall V/8, 10:00–12:00, Iztok Golobič, Izpit: Energijski in snovni tokovi v industriji (Energy and material flows in industry (ESTP))
  • Lecture hall II/5, 11:00–13:00, Tomaž Mrlak, Izpit: Operativni postopki letal (Operational procedures of aircraft (OPLP))
  • Lecture hall II/5, 11:00–13:00, Tomaž Mrlak, Izpit: Operativni postopki letal (Aircraft Operating Procedures (3124))
  • Lecture hall IV/3A, 11:00–14:00, Gregor Čepon, Izpit: Advanced Dynamics (Advanced Dynamics (ADDE))
  • Lecture hall II/2, 12:00–13:30, Tanja Potočnik Mesarić, Predavanje 2 - PRT
  • Lecture hall III/4, 12:00–14:00, Leon Kos, Izpit: Napredna računalniška orodja (High-end computing tools (NROR))
  • Lecture hall V/8, 12:00–14:00, Dominik Kozjek, Izpit: Krmilna tehnika (Control technology (KRTR))
  • Lecture hall V/8, 12:00–14:00, Dominik Kozjek, Izpit: Krmilna tehnika (Control technology (KRTR))
  • Lecture hall III/2, 14:00–17:00, Aljoša Peperko, Izpit: Linearna algebra in vektorska analiza (Linear algebra and vector analysis (LAVR))
  • Lecture hall III/2, 14:00–17:00, Aljoša Peperko, Izpit: Linearna algebra in vektorska analiza (Linear algebra and vector analysis (LAVR))
  • Lecture hall III/4, 14:00–16:00, Primož Podržaj, Izpit: Diskretni krmilni sistemi (Discrete control systems (DKSM))
  • Lecture hall III/4, 14:00–16:00, Primož Podržaj, Izpit: Diskretni krmilni sistemi (Discrete control systems (DKSM))
  • Lecture hall IV/4, 14:00–17:00, Aljoša Peperko, Izpit: Linearna algebra in vektorska analiza (Linear algebra and vector analysis (LAVR))
  • Lecture hall IV/4, 14:00–17:00, Aljoša Peperko, Izpit: Linearna algebra in vektorska analiza (Linear algebra and vector analysis (LAVR))
  • Lecture hall V/2, 14:00–17:00, Aljoša Peperko, Izpit: Linearna algebra in vektorska analiza (Linear algebra and vector analysis (LAVR))
  • Lecture hall V/2, 14:00–17:00, Aljoša Peperko, Izpit: Linearna algebra in vektorska analiza (Linear algebra and vector analysis (LAVR))
  • Lecture hall V/8, 14:00–17:00, Aljoša Peperko, Izpit: Linearna algebra in vektorska analiza (Linear algebra and vector analysis (LAVR))
  • Lecture hall V/8, 14:00–17:00, Aljoša Peperko, Izpit: Linearna algebra in vektorska analiza (Linear algebra and vector analysis (LAVR))
  • Wednesday, 1. July
  • Lecture hall II/2, 08:00–10:00, Tanja Potočnik Mesarić, Predavanje 1 - PRT
  • Lecture hall II/2, 12:00–13:30, Tanja Potočnik Mesarić, Predavanje 3
  • Thursday, 2. July
  • Lecture hall II/2, 08:00–10:00, Tanja Potočnik Mesarić, Predavanje 4 - PRT
  • Lecture hall II/2, 12:00–13:30, Tanja Potočnik Mesarić, Predavanje 5 - PRT
  • Friday, 3. July
  • Lecture hall II/2, 07:00–10:00, Katja Pustovrh, PRT
  • Lecture hall II/2, 10:00–13:00, Tanja Potočnik Mesarić, Poletni raziskoskovalni tabor - sprejem